Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle checks from the latest scan.
Featured
Build ALeX humanoid robot - 4.5ft, lightweight frame using servos, ez-B camera, 12V motors/battery, recycled materials and adhesive options.
question
Micro Dc Motor With Position Control
Hello, I have searched and searched and searched trying to find a way to do this can someone please help me or provide a link with instructions on how to connect a micro geared dc motor with encoder and use it with either ezb4 or arduino with an hbridge. I have designed a prosthetic (several all previous just using servo motors) that I want to...
7
2 k
Al1953 |
question
Ez Script Not Working
Can't see any options under AutoPosition, I right clicked it and this small list apperaed the code says: There are no auto position actions. Maybe there isn't even an Auto...
4
2 k
Dave Schulpius |
question
Two's Complement
Hi, I need to do "two's complement" on numbers but can't seem to find any commands in the software that would let me do that in any easy way. Am I over looking a command?
2
2 k
Al1953 |
question
Proxy Server Issues With ARC Software
I am trying to connect to the ARC software but my school uses a proxy server to access the Internet. At this point in time our EZ robots are only...
5
2 k
DJ Sures |
question
Motor/ Servo Help
Hello All, I am currently using the EZB4 for my 54" biped robot. The robot weighs 13 pounds. And I need help picking out the correct type of motors. The EZ-B motors won’t cut it for...
11
3 k
Dave Schulpius |
question
Can't Save Any More Projects
My new install went well, I save one project I created, after that I can't save any other project - why?
4
2 k
EzAng |
question
Respeaker Raspberry Sound Location Question
I have been very interested in having my robot look in the direction of a person speaking. In the above picture you will find a far...
11
3 k
Ellis |
question
Libary Doesn Show Stl Rgb
i cant see the stl in robot designer from the rgb case. i was looking the stl rgb front and back.
1
2 k
Nomad 6R |
question
High Torque Servo DC 12-24V 380Kg.Cm
using High Torque Servo DC 12-24V 380kg.cm with the ez kit Best method
1
2 k
Dave Schulpius |
question
New Robot Need Help
I just received my new JD robot humanoid First I charged the battery second - I plugged the battery with the controller together, it come on saying welcome and go to the website -...
9
2 k
Nomad 6R |
question
Can't Connect To Network
Hi I have a JD humanoid robot fully charged - flashing green on back when I turn it on it say something like go to the website and the connected to my network I locate the...
14
3 k
Nomad 6R |
question
Inmoov Bicep Servo Question
Hello all! First of all I want to thank all of you for your support with inmoov/ezb. It has been very helpful to me to this point in my build. I was wondering if...
10
3 k
nallycat |