Robot Building Questions
Unlock the true power of automation and robotics by becoming a proud subscriber of Synthiam ARC Pro.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Men's High-top Sneakers
Cyborg fashion sense has no limits! These extremely comfortable high-top canvas sneakers are made to last and to impress...
Featured
iRobot Roomba Movement Panel
Control the iRobot Roomba and read sensor data from 500 series roombas
Featured
My Inmoov Running On Synthiam
Initial test of my InMoov robot running on the new EZBv4. I have 24 servos connected to one v4 and all are running OK. Thanks for everyones...
question
Until The Neopixel Bits Become
Until the NeoPixel Bits become available... https://www.ez-robot.com/Shop/AccessoriesDetails.aspx?prevCat=9productNumber=54 ...what is the preferred stand-in...
6
2 k
DJ Sures |
question
Hello,I Am New To JD And I Wan
Hello,i am new to JD and i wanna print one part of it.how do i connect my 3D printer and laptop?Any help will be much appreciated.thank you.
1
778
DJ Sures |
question
Is It Possible To Convert Bloc
is it possible to convert Blockly to EZ-script? I have a good routine I want to use that I created in Blockly, but it needs a few tweeks that I need to add in EZ-Script.
2
2 k
edbot |
question
New Here And Am Asking Some Qu
New here and am asking some questions. My project is an independent drive via 24 volt Jazzy motors controlled with a Sabertooth 2x32. My wish is to have autonomous operation and have RC over ride. I have an operational RC and operational Arduino autonomous but have not been able to assemble both. Dimension Engineering (Sabertooth) have guided me...
5
885
DJ Sures |
question
So I Am About To Buy Another L
So I am about to buy another lipo battery for the EZ VB4, the one I was using for my EZ BV4 was a 7.4V, 1300mAh and I was wondering if it is safe to use a 11.1V, 1300mAh. I have read a few threads in this community but I just felt safer in asking if someone has used the 11.1V and has not had any issues burning anything.
3
2 k
Heattroks |
question
HDD Servos
Hi, I am 3d printing the STLs for the Revolution6. I have 12 HDD servos on order, due in March. In the meantime I have to hand the Developer Kit which has HD servos. These do not seem to fit the EZ...
4
2 k
itsmeintorre |
question
Hi, Pretty New To This And Sea
Hi, pretty new to this and searched but couldnt find a answer. I have about 10 servos that run on 5v and I want my ez-b v4 to run them, is the pwm from the v4 ok as long as you power from a 5v source? Thanks!
4
2 k
Almostrodney |
question
Hello Everyone,We Have 4 EZ-
Hello everyone, We have 4 EZ-Robot Humanoid JD. The 4 ez-robots are 2 years old. We tried connecting via phone and it worked but the capabilities of the phone software was limited. the PCs we used and had the software recently downloaded wouldnt recognize the robot at all. But one of the teammates who had the software downloaded from the first of...
3
817
DJ Sures |
question
Hello Community,I Would Li
Hello Community, I would like to deploy something similar to this project NeoPixel Ring with Arduino as control board but I need to use LED strips. 60 LED qty. Will this work for LED strips? Or is there a simpler way to control many LEDs with the EX-B Help is greatly appreciated. Thanks, Mark
1
2 k
Jeremie |
question
Weve All Seen It. The Super
Weve all seen it. The Super Armatron has it, the Omnibot 2000 has it, and if you take away the head of Gypsy from MST3K, its all you have left! I am of course talking about those fun bits of rubber tubing that add a clean, industrial flourish to any robot. Im in the process of taking an old Robie Sr. and giving it the same treatment that DJ...
2
2 k
Bobsheaux |
question
I’M Trying To Connect An Ardui
I’m trying to connect an Arduino Nano with the EZ-B v4 to offload some of the work. UART1 and UART2 work fine! Problem is with UART0 (information is send but...
34
3 k
Tonlaar |
question
Cheat Sheet Question
i dont see a wait command in the cheetscheet for the camera.i wanted for jd to wait before he sees the color red, then do the respons.
6
2 k
Nomad 6R |