All Community Content
Add Remote telepresence to control any robot from your phone or PC
Gaming Mouse Pad
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Control robot servos via Xbox 360 Kinect body joints with per-joint servo mapping, automatic degree calculation, smoothing and upper/lower control
Combine Borg and crane robots with EZ-B4 controller, servos and strobe light; programmed with Synthiam ARC for voice commands and verbal responses.
ARC 2022.10.08.00 (Pro & Runtime)
Updated Blockly controls: getServoRealtime, new servo movement commands, virtual servo ports, and smoother analog joystick max-speed control.
0
3 k
Preferred Hardware
I have a question what hardware provides the best feature set when using ARC Arduino or EZ-Robot?
9
897
Servo Gripper
Attach the Servo Gripper to any EZ-Bit connector to grab objects with a strong metal-gear servo for a tight, secure hold.
4
16 k
Ultrasonic Radar
Ultrasonic on a servo sweeps 180; radar shows distances and obstacles, integrates with movement panels for automatic avoidance, scriptable...
10
10 k
Cycle Servos For Controller Analog Sticks
I'm looking to use my L2 and R2 buttons to change what servo groups my analog sticks control when they are held, is there a way to do...
11
2 k
Reducing Sensitivity Setting And Max Speeds
So close to finishing things, I'm stuck trying to make Chopper easy to control. Background I'm using the joystick 1 controls movement, a sabertooth movement panel controlled by an Arduino Uno, Simplified Serial Mode 9600 Baud. 24vdc supplies the Sabertooth to drive 2x 150w motors. The issue I'm having is it's very all or nothing, which would not be...
5
964
ARC 2022.09.26.00 (Pro & Runtime)
Fixes speech synthesis so first utterance completes by restoring the 'speaking' event for EZ-B 'say to stream' command
0
3 k
Issue Saving Project
When I add RPlidar skill I cannot save project. OK if I delete it> Any ideas?
1
927
Intel Realsense T265 v26
T265 VSLAM for ARC: SLAM-based mapping and precise way-point navigation, low-power tracking, and NMS telemetry.
145
79 k
Remote Control Of Hard Wired EZB4
Is there a method of controlling a robot remotely which has an onboard PC with EZB4 connected via USB? All of my robots bar one, use WiFi connection and...
13
2 k
Lidar-Lite Laser Module
Laser Lidar-Lite ARC control reads distance, velocity and signal strength (0-40m+) via EZ-B v4 i2c, setting EZ-Script vars for robotics
8
11 k
ARC 2022.09.18.00 (Pro & Runtime)
Camera and robot-skill GUI updated for better resolution scaling; new Blockly Say EZB blocks accept EZB index; servo touch slide replaces button
0
3 k