DSBaily
USA
Asked
When I add RPlidar skill I cannot save project. OK if I delete it> Any ideas?
Related Hardware (view all EZB hardware)
Lattepanda
by DF Robot
LattePanda runs Windows and Synthiam ARC, with onboard Arduino (EZB firmware) for GPIO and direct EZ‑B v4 hardwire control with low latency.
Wi-Fi / USB
Servos
12
Camera
Audio
UART
1
I2C
ADC
5
Digital
12
Related Robot Skill (view all robot skills)
Rplidar
by Slamtec
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle avoidance, and navigation.
Requires ARC
v28
Remove the robot skill from your project and save
Close all instances of ARC
Load ARC
You should be prompted to update the robot skill for RPI Lidar. Do so.
The issue of not having a Lidar connected to the PC while saving the project has been fixed here: https://synthiam.com/Support/Skills/Navigation/RPI-Lidar-A1?id=20980