Here is Mr. Metal again for those who missed him.
Might need to turn up volume
Please leave a comment,
Thanks
EzAng
By EzAng
— Last update
Discover more robots
Gotrobbed's The R7 Droid Project
Build an R2-style R7-M1 droid using EZ-B to control motors, sounds, Xbox wireless, camera eye-tracking, voice...
Markthebotbldr's Robomower To Be Transformed With Synthiam
Convert RL500 Robomower into an autonomous EZ-B robot with Kinect, motor controller and Arduino, integrating sensors via...
Peterfrisch's It's Yellow, It's Boxy, It's .... No Wall-E...
Convert a Caterpillar toy with EZ-Bot: install continuous servos for treads, hot-glue servo horns and route cables for...
ezang
ni in the chest .these are for letting the choulder move up and down .
what do you use for the neck?
for the neck are 3 pistons similar like pics above but smaller .
ps is it me but i dont recieve no mails from here.
where are the stls for the neck pistons?
ezang
here you can choose witsh part you need. click on it ,next page download. neck parts
one thing .make sure you dril a hole 3 mm on top piston to let the air escape. the hole ontop is for a screw so the piston wont rotate .
here a picure make sure the pistons goes very easly in and out.
thanks, Nomad for the parts
Nomad is great with the printing, he is my go to guy if ever I need a part!:D