I forgot to click Robot Showcase so I am starting over here with Bob. Bob is my 3d printed EZ robot built with EZ-Bits, 3d printed parts and hot melt glue.
By David mcsdaver
— Last update
Other robots from Synthiam community
Ezang's Mr. Metal Robot 2020
Synthiam ARC controlled Talking Mr. Metal robot with EZ-B4, 2 IO Tinys, RGB eyes, ServoCity gears and DFRobot hex base...
Nitrobot's The Six Alternate Power Source
DIY battery upgrade for Six robot: swap 1300mAh for a 5000mAh Traxxas pack for ~4hr runtime, custom connector and...
Doombot's Doombot V1.0
DoomBot V1.0 - 5-ft robot with wheelchair drive, DC window motor arms, pneumatic cylinder and sculpted exoskeleton...
Bob is about to get a little shorter and a new head 3d printed.
Make him a bum bag so his lipo can fit in there.
Making him shorter..?
I would make him taller if you can and give him some hip bones.
The leg bone's connected to the knee bone, The knee bone's connected to the thigh bone, The thigh bone's connected to the hip bone, Now shake dem skeleton bones!
He is having a hard time walking and I made part of his body too long. A little shorter and he will be walking better, plus the new head will be lighter. His battery will fit in his body I hope. lol
Do you know why he doesn't walk well?
He needs more servos, shorter means even less servos...more servos are needed.
No hip servos, no ankle servos..hmm.
What sized lipo are you using?
Just mod the chest so a larger lipo can be fitted. I would scare you if i told you what i could fit in mine...