michaelc
USA
Asked
— Edited
I have both JD & Six. I have both of them working with the help of the EZ Robot Tutorials. Now I would like to move forward with making my own Program for both, Voice Recognition for them & being able to download music to them! I have ipad & iphone so I understand that maybe some of these features will not work. Where do I go about finding instructions on how to do all these things. I have seen in the program some of the commands in writing your own program but I have never seen anything on voice recognition & downloading music! I would appreciate any help on this matter! Thanks.
You don't retire in America! No good medical Insurance!
85% of Canadians have little or no savings and will have to work into their golden years too... Many of us baby boomers in Canada have been living way beyond our means.... So it's not just in America my friend....
Also, you don't have to be around a WiFi network to connect your robot to your computer. Please ezb into Access Point mode and connect directly over your computers wifi.
From the tutorials: The EZ-B v4’s integrated Wi-Fi has an embedded webserver, DHCP server (for access point mode) and configurable connection modes. The Wi-Fi connection will also use B/G/N modes with WPA, WPA2 and WEB security. When the Reset Button is pressed, the network settings will be reset to the default configuration.
Web Server To configure the Wi-Fi settings, the EZ-B v4 webserver can be accessed by your web browser. If the EZ-B v4 is in Access Point Mode, the default web address will be http://192.168.1.1. If the EZ-B is in Client Mode, you will use the IP Address that ARC has detected (i.e. http://<ip address=).