clovejr
USA
Asked
— Edited
Resolved by Dave Schulpius!
Hello,
I found an issue with the factory wiring with my Roli's H-Bridge wiring. When I was doing the h-bridge test I noticed that the unit wouldn't move. Upon inspecting the h- bridge wiring I noticed that the red and black wires coming from the on/off switch were wired wrong on the h- bridge. The red and black wires were off by one screw slot. I also noticed a burning smell, but couldn't see anything that was burnt. After correcting the wiring error,I still can't get the unit to move. I'm wondering if the wiring error blow out the h- bridge.
Is there any diagnostic that I can do to confirm this, and if the h- bridge is bad how do I go about getting it replaced under warranty?
Thanks in advance for your help
Calvin
@Rich, your probably going to say no, but I thought I would offer... I can print you off your missing rotational servo parts and mail them to you... Just tell me what parts you need.... Consider it payment for all the help you have given me since I joined the EZ Robot forums....
Yes, I foolishly bought myself a 3D Printer....
I did notice you bought yourself some 3d printers.
With all this stuff I'm sure I'll be fine
(there's more that wouldn't fit on the table too!)But thanks for the offer
No worries @Rich... If you ever need something printed, I don't mind.... Really...
That's an awesome collection... I actually printed myself a Six... Just need to order the servos for him....
So let me answer a couple of questions, will you...
I've let you answer loads lately (in fact I was awol for over a week until 2 days ago) You must be almost up to the 100 milestone by now
4 more dude!... Other than you and DJ, how many others do you know of who hit 100? I wouldn't mind being 3rd...
I haven't really been keeping track lately (I haven't been keeping track of my own for months now), I'm sure DJ or someone else at EZ-Robot could look it up though (would be cool to have a scoreboard of sorts).
@Rich... thanks for the sabertooth ramping script by the way. Very timely... saves me to have to write my own...
Ooops, sorry didn't mean to thread jack... To the Op, ez robot should respond soon. You don't need to worry about that...
Hello ,
To EZ-Robot ..... When will my warranty request be processed ?
I need a new H-Bridge to replaced the one that got fried from the factory wiring error.
Thanks, Calvin