USA
Asked — Edited

Controlling Specific Leds Besides The I2c Hardware?

Skip to comments   Jump to end

Is it possible to use special leds such as 7 color blinking leds within the ezb programmer, besides? using the blink i2c hardware? What I was planning to do was to possibly use servo extension wire to wire the leds, and then plug them into two ports, take pins D4 and D13 for exemplars. Is there any program to control these leds to make them work in a correct function? Thanks.:)


ARC Pro

Upgrade to ARC Pro

Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.

PRO
Synthiam
#9  

Sihro looks neat. looking forward to seeing him come alive

#10  

@ roboticsmaster i would love to see you post updates in the project section.:) - Josh S

Canada
#11  

@RoboticsMaster

Here is a site that I found with some information re: Microcontroller Interfacing

Based on my "limited" grasp, at this time:P, I put together this circuit idea that might work for you regarding your 7 color LED and it's MODE switching requirements.

User-inserted image

Anyone who can qualify or disqualify this circuit (and perhaps explain how and why) please chime in as this will assist my learning curve as well:)

Login to post a comment