deleted
Portugal
Asked
I plan to use a Raspi 4 as an embedded SBC. From that I want to use four EZBs to control sensors and servos. Does anyone know how to make a Pimoroni servo 2040 into an EZB? Is it possible? Thanks
Related Hardware (view all EZB hardware)
Raspberry Pi
by Pi Foundation
Run Synthiam ARC on Raspberry Pi 4+ with Windows 11 for robot control; use external EZB/Arduino for reliable I/O, SSD/USB storage recommended
Wi-Fi
Servos
✕
Camera
Audio
UART
✕
I2C
ADC
✕
Digital
✕
We do not have a Pimoroni servo 2040 controller to test with, but we may be able to whip up a firmware for you to try. They are not Arduino compatible, so our existing firmware will not work on their onboard microcontroller. They are python compatible, so the firmware could be altered to work with python. We were hoping you could test the various firmware we build to get it right.
Have you considered using any supported EZBs or servo controllers? As seen here: https://synthiam.com/Support/Hardware/Hardware-Overview
cd26453
do you mean something like this ?
hi
i found this video about the servo board 2040 .
They'll communicate via USB, I believe. The documentation for that board is quite vague. We're having a few challenges sorting it out
Thank you. We will post here with an update when we have something for you to test. In the meantime, there are plenty of supported EZB controllers that you can try
. Have a great day! You can find the full list here: https://synthiam.com/Support/Hardware/Hardware-Overview