Robot Building Questions

Ez-B V3 Buy Back

hello all, I was reading around on here and seen a possible buy back on the ez-b v3. most of the post were old, so I thought I would ask. is it still available? I really want to get the new ez-b and that would be a great help. thanks, Airwave1206

Nice Little Write-Up In Makezine Today

https://makezine.com/2017/01/31/ez-robot/ I can't view the video while at work, but the article is a nice short history of EZ-Robot. Alan

Personality Generator Broke After Merging Projects

I merged a bunch of controls from one project to my main project. Ever since then I've been having trouble with my personality generator. It will run a few times and then it wont run any of it's scripts. It will try to cycle through them but after that each time it tries to launch one it will throw an error. Here's what I'm getting in the debug...

Sound Activated Circuit - Pc Vs. Ezb

I followed the tutorial to make the LED flash when my robot speaks. I noticed that if I have it set to the PC Speaker, the LED flashes in sync with the speaking but if I switch to the EzB, the flashing is not in sync and ends way before the talking completes. I am using the code from the tutorial (see below). # Sound Servo to PWM range Script #...

Connection Chime

Heya guys. Anyone know if its possible to disable, remove, or replace the "i have successfully connected to your network" chime from the connection startup?

Can't Configure Rovi As A Wifi Ap

We are trying to reconfigure the Rovi to be a Wifi AP. We can connect to the Rovi via my router, we can access the Rovi's configure pages, both from my PC and my tablette, we can apparently save the "EZ-B Wi-Fi Access Point Mode Configuration", we then reboot the Rovi, either using its power switch or the reboot option from its Diagnostic...

2S Lipo Vs Servo

First I like to say that i'm very happy with your products But here we go A fully charged lipo puts out 8.2 volts and the servo's that are in the kits can have max 7.4 volts. I used in my projects cheap towerpro 995 servo's and a stepdown regulator to put out max 6 volts because if i put the full lipo voltage on them they begin to smell funny and...