Screen To Camera icon Screen To Camera — Capture any screen area and stream video to a configured camera device; requires a Custom device and 100% display scaling. Try it →

ARC Pro

Upgrade to ARC Pro

Your robot can be more than a simple automated machine with the power of ARC Pro!

Author Avatar
Canada
#2  

The linked thread mentions using 12 - 24 volts to drive the motor even though it will probably have a much lower voltage specified. This is correct and is done in order to overcome the winding inductance and get a fast response time from the motor. However, this high voltage drive must be pulse width modulated to prevent the max. motor winding current from being exceeded. This is accomplished by monitoring the voltage across a low ohm resistor placed in series with the winding and turning the drive on or off as required.