MPU6050 Accelerometer Gyro Temperature icon MPU6050 Accelerometer Gyro Temperature — Reads MPU6050 gyro, accelerometer and temperature via I2C, initializes and returns data on-demand to EZ-Script variables using ControlCommand RunOnce Try it →

ARC Pro

Upgrade to ARC Pro

Become a Synthiam ARC Pro subscriber to unleash the power of easy and powerful robot programming

#1  

@clarky,

Have you gone through ALL the JD Tutorials yet? They will answer most question.

#2  

Without being connected to JD via WiFi you can only calibrate the servos physically. In doing that, each servo will only be close to a final setting. Some may even come up perfect, but most will be at least a little off. Once you have set each servo as closely as you can, you then have to electrically calibrate them to a final position and that requires JD be connected to your WiFi so that you set up a "Servo Profile." Thus, at the moment your main problem is that you can't seem to connect.

As Mentioned by OldBotBuilder, you need to go through all the tutorials for JD. They will include a section on getting connected. Once connected, other things will start to fall into place.

#3  

Thanks guys! Hope this works!