XV11 LIDAR icon XV11 LIDAR — Real-time 2D mapping from Neato XV-11 360° LIDAR via GetSurreal controller; exports $LIDARDistance/$LIDARIntensity, configurable angles, color, zoom. Try it →
USA
Asked
Resolved Resolved by Nomad 6R!
3 Participants

Wifi Connection Problems

ARC Skip to comments Jump to end

No matter what I do I can not connect the EZ-robot EZ-B v4 to wifi. I refuse to go Pro Sub. when I am only using one laptop.  Would I have to redownload ARC again? Chris


Related Hardware (view all EZB hardware)
EZ-B V4
EZ-B V4 by EZ-Robot
EZ-B v4 with Synthiam ARCx controls servos, sensors, camera and audio over Wi-Fi or USB serial, no firmware needed.
Wi-Fi / USB
Servos 24
Camera
Audio
UART 3
I2C
ADC 8
Digital 24
Jump to end

ARC Pro

Upgrade to ARC Pro

ARC Pro is your gateway to a community of like-minded robot enthusiasts and professionals, all united by a passion for advanced robot programming.

Author Avatar
PRO
Canada
LinkedIn Thingiverse Twitter YouTube TikTok
#1  

Hello @indywriter

Have you checked out this troubleshooting page? Common issues are:

  • Anti-virus blocking - disable anti-virus software (Windows defender is fine - don't mess with it, but Norton is known to cause issues)
  • Trying to connect with client mode when direct AP mode is sufficient
  • Router IP address conflict (same IP address as router) when ethernet is attached - try removing

If you have a USB wifi dongle you could try connecting on WiFi 2

Author Avatar
PRO
Belgium
Thingiverse
#2  

hi indywriter/jeremie

also delete your browser history and reboot pc .if you had many try's .

Author Avatar
#3  

I have had issues with Windows firewall blocking access.

Author Avatar
#4  

Thank you all for your help. My Wi-Fi problem has been resolved.

Login to post a comment