I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Discover more robots
Ccraig411's Roli
ROLI robot built and ready to program with the developer kit; 3D-printed parts complete a home-built bot for hands-on...
Pashley's Jd Days
Unboxing and assembly of a servo-equipped kit with servo alignment and the memorable captured moment
Ezang's My New Update Arm Robot 11/14/2019
Robot arm gripper upgrade: 5th MG996R servo for auto-positioning, five servos total using EZ-Builder and EZB4 with a...
ezang
here's another piece of the puzzle .
it goes here . same on the back side . there are two .screw M3
it looks like this then .
Looks great, how long did it take to print?
I am at the grandkids home, can't do much from here, but I will check in now and then
EzAng
ezang
i think 3 pieces is about 11 houres on my printer.maybe your printer is faster.
Look good, I don't know how fast I can print
when I get back, I need to print again the pinky for the hand, broke putting the screws into it it :-(
ezang
print the normal speed that is original in your slicer . howmuch infil do you use ? i use some 20 to 30 infill.
I use 20 or same as you
I have been printing the rotation wrist now for my "Thing" hand from the Addams family
Just need more time, :-)
EzAng
My last piece for the wrist I upped the speed to 80 and up the nozzle heat
Turning into a printing fool , lol