I'm setting up color tracking and following a tutorial but when I go to the camera settings I cant edit the areas circled in red
tutorial(I'm on step 2): https://synthiam.com/Community/Tutorials/59?courseId=2
can somebody help?
from Finn
finnboi123
USA
Asked
1 Participant
Color Tracking Settings Issue
Related Hardware (view all EZB hardware)
Six Hexapod
by EZ-Robot
Synthiam ARCx controls Six Hexapod with Auto Position gaits, joystick, voice, AI, vision tracking, and browser access.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Because you have multi servo enabled. Press the multi servo button and edit the servos individually. Means that robot you’re using is controlling multiple servos.
check manual here: https://synthiam.com/Products/Controls/Overview/Servo-Controls-17394
it says "Unable to save. A servo port is specified more than once. servo ports must be unique. Port: N/A".
It can't save becuase there's a servo port specified more than once. The servo ports must be unique. The servo port that is specified more than once is NA. Remove the NA servo that's specified more than once.
in the tutorial both the x and y servos are N/A
https://synthiam.com/Community/Tutorials/59?courseId=2
That tutorial is for movement tracking. It is not for servo tracking. It'd be best to read the tutorial rather than only looking at the photos. Use the correct tutorial, and have fun! https://synthiam.com/Community/Tutorials/112?courseId=2