All Community Content

Wall-E Builders, Unite!

I'm going to be starting up a Wall-E robot from the U-command Wall-e and the EZ robotics kit pretty soon. Does anyone want to share their ideas and talk about them? I'm gettin all excited hehe

Upcoming New Ez-Robot Website Features?

I was curious if there were any features you were willing to divulge on the new website. Any changes to the forums too?

How To Connect Radar Hc-Sr04 On Ez ?

Hi, i want to connect a distance radar HC-SR04 on my ez, but i don't know to do it. And I don't understand the tutorial of DJ. Is there anybody to help me please ? I had understand to connect on the Trig, Echo and GND on D0, then Vcc on D1. Is it right ? But on ARC you can use ADC0 for IR Port ! And how connect Vcc ( HC-SR04) on the ez ? Thank you....

Help Learning To Use The New Ez-B Serial Terminal

Sunday, 24 February 2013 Good Morning DJ ! I APPLAUD Your Addition of Serial Terminal to ARC ! Early this morning I connected to my iRobot Create via Com1 and the Creates Serial Cable, and the minute I set the Baud Rate to 57600, I got the Powerup Dialog Screen from the Create ! I was not so fortunate on the Send Side, trying 128 131 followed by...

Changeing A Glyph Image

Hi Dj ! Recenly, I triyed to tracking new image . So in Camera Config Augumented Reality Change the Glph 1 to my dog photo , then try to Recgnize my dog photo , but, Still recognize original Glph1, Is it regect the additional Image . So maybe I think we can not change the Glph 1 to another image. Is it a correct function of Camera Config of...

Has Anyone Ever Hacked A Furby With Ez-Robot?

I've always been interested in hacking a furby, 1998-2013, has anyone ever done this? if so, how?

Automatic Load And Unload Scripts

@DJSures As my projects get larger I am thinking it would be easier if I could automatically close one project file and load another from within a EZ-Script. We can already auto start a script at application start-up but could this functionality be extended to load and execute a preselected project from within a script? My thinking is this... While...

Vary Output Voltage?

I would like to vary the output voltage on two pins between 0 and 5 volts. This could be used to control LEDs etc. Any one have any hints on how to do this?

What Kind Of Other Wall-E Robots May I Use?

Hi guys, I'm Çhåøs. (short for Çhåøtìç_Røbøtïx) and I was just wondering what other wall-e robotic toys could be used to make the wall-e autonomous robot using your delightful and EZ kit. I see you guys used the "U-command Wall-E" but finding that on my budget is being difficult. Are there any other wall-e robots I can use? Thanks!

Gyro Sensor

Has anyone used a gyro with the EZ-B? If so, does one work better than the other? I'm looking at either, the NXT gyro sensor from https://www.hitechnic.com/cgi-bin/commerce.cgi?preadd=action&key=NGY1044 or the triple axis from https://www.trossenrobotics.com/p/Triple-Axis-Digital-Output-Gyro-ITG-3200.aspx Any ideas are appreciated