All Community Content

Free-Track

Some time ago I built a system with 3 freetrack infrared LED and a webcam modified for head tracking and used in the flight simulator, the software is free and there are tutorials page to manufacture everything. I found an interesting alternative for robot control. I have not tried with ARC nor if supported but worth looking....

Dropped Ezb , Now Doesn't Work.

While working on Sunshine, I dropped the EZB. It's regulators bent. I bent them back. Now, the red light comes on, but the Blue light doesn't come on unless you mess with the board. It mainly stays off.

Newbie Just Placed An Order

hello everybody, I'm new here and after lurking around for a week or so and having just placed an order for 2 ez-robots and a dev kit I thought I'd introduce myself, my name is Andrew McMullen and I'm from Perth Western Australia but I'm logged in under the username Gameznet, Im not really much of a forum user but I am so excited about ez-robot...

Design Files Update Time?

hi everyone, i think we need a update in the desing files of ez-robot. the following things are needed: 1: ez-b v4 exact dimensions (prefered in mm), aswell for the screw holes. 2: standard servo dimensions. 3: aswell the mini servo dimensions. 4: for when it is released, the optional power pcb dimensions 5: (optional to me:) ez-bit male and female...

10A On Ez-B

I got the voltage regulators 1084-5.0 now. As this voltage regulator supplies the power only to the 5V and doesn't reach the microcontroller, is is okay if I use two of them in parallel to get 10A output on EZ-B to drive all the servos, this way I can avoid external power supply to the servos... Can the etching of the EZ-B take 10A?

Heavy Duty Servo Spline

I would like to find out what style of spline the heavy duty servos have. Thanks in advance.