All Community Content
Unleash your creativity with the power of easy robot programming using Synthiam ARC Pro
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Animate servos to simulate jaw/mouth with ARC text-to-speech; configurable vowel/consonant timing, start sync, multi-servo control, pause/stop.
Featured
Sunshine robot returned - 4.5 ft tall (6.5 ft arms up), Version 1 with build and wiring photos; community-supported, ready for software tuning.
question
First Robot
I have parts on the way. I am trying to figure out how to add the pieces I have bought using ARC so I can a head start on the new project. Is there a file to select the parts you have ordered and start off asap?
2
2 k
Andy1939 |
question
Hello Everyone, I Am New To This World.
I just wanted to say "Hello" and introduce myself. My name is Steve, but I go by stonewolf on here, I live in Plymouth, Indiana USA. I am new to the robotic world, but I have built and customized radio controlled 4x4 trucks. I ordered my first EZ-B v3 kit back in November, then I found out I had preordered the v4. I have read many of your...
8
3 k
Robot Doc |
question
Merry Christmas!
Merry Christmas (aka Happy Christmas) from across the international date line to those in North America and everyone else! The new year will bring even better creations using the Version 4 EZB! Worth the wait!
14
4 k
Robot Doc |
question
A Warning To Our Young Members Of All Ages On This Forum.
OK youngsters, off to bed with ya. Santa will pass you buy if your still awake when he gets to your house. If your sound asleep when he arrives he may just have a new EZB V4 for you in his bag! According to NORAD's Santa Tracker he's in Little Rock, Arkansas as of 1232 central time. Hope you were good this year!
0
3 k
Dave Schulpius |
question
Never Introduced Myself
My name is Jamie. Been into robots since I was a kid. The only one I can recall having though was the Tomy Dingbot. When I was in my late twenties I got a robosapien and just recently picked up an identical one since the original is gone. I briefly had a V2 but returned it when I realized it still walked horribly. Anyway I have a Roli and a JD on...
4
2 k
Antron007 |
question
Servo Question
Hello and first of all, scuse me for my bad english. I am trying to use servos for the movement of my robot, but i see a bad thing. When servos goes in position i set, they have a vibration.......... For example, i set a servo in 60% position. It goes to the position and it start "buzzing"....... Do you have same problem? I am thinking...
10
3 k
Dave Schulpius |
question
Seasons Greetings
Merry christmas all and a happy new year to everyone Not been on for a while or able to work on my robot as my sons been keeping me and the wife very busy aswell as having another one on...
4
2 k
Nomad 6R |
question
Water Snake Robot
water snake robot Merry Christmas from Buster and the Bookmaker
0
2 k
bookmaker32 |
question
Motor Controller Signal Voltage
When you hook the motor controller to the ez-b, what is the max voltage that can run on those connections of the motor controller. Do I need to regulate it or...
12
4 k
Rich |
question
4 Pin Connector For I2c
I've been looking for something for months now but not found it. I need a jumper wire that fits the I2C port on the EZ-B. 4 pin 0.1" spacing which plugs in to the EZ-B...
7
5 k
Rich |
question
Gyroscopic Sensor Recommendations?
As you may know, I'm building a humanoid robot. I'm looking for a good gyroscopic sensor that could fit into my robot (the new back allows a bit more space, so if it's bigger it could fit) and is easier to code (I need it to stabilize the robot and tell it to get back up if it falls over). I've been looking at a gyroscopic 3-axis sensor at...
18
4 k
Putt Putt |
question
Is There A Way To Get Previous Versions Of ARC
I have an older computer that has XP, is there a way to get ARC for it? I know EZ Robot does not support XP anymore.
9
5 k
Purple |