All Community Content
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
Gaming Mouse Pad
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Diagnose EZ-B Wi-Fi connection issues with verbose EZ-B communication logging, ping tests, log export and diagnostic reports for Synthiam support.
Featured
Teddy Ruxpin robot with EZ-B brain and Synthiam ARC: Bluetooth control, voice synthesis/recognition, servos for mouth, eyes, arms, neck.
question
Great Uart Can Now Rx 0 To 255 But
Thanks DJ can now RX all integers from 0 to 255. The only issue remaining is TX 34,40 and 92. Thanks
5
2 k
DJ Sures |
question
Bug Report For ARC
I have found a bug in the windows program, it seems every time that i attempt to stop a script in the middle it becomes unresponsive and attempts to complete the script anyway, i have found any attempt to stop the robot using the stop button or to start a new command like calibrate causes the whole program to become unresponsive and requires me to...
10
3 k
foxtrot25m |
question
Demo Question
the current demo seems to cut short and its hard to hear the final sentence, i just wanted to confirm its ment to stop half way through the song..? thank you Richard
1
2 k
CardboardHacke… |
question
Ultimate Wall-E On Ebay $135.00
the auction ends in an hour or so. currently at 135.00 that's a GREAT price. one of the arms is a little buster, but who cares right? im at work so I cant add...
11
6 k
jstarne1 |
question
Trying To Use An Adc Port For Pir
I am trying to use an ADC port to get the signal from a PIR sensor. I have in my script: $PIR = GetADC(A7) and I get this error message; Error on line 26: Missing String Quotes or Invalid Expression: A Is it possible to use this port for this purpose? If so, what is the proper syntax to use it? Thanks
8
3 k
mtiberia |
question
Wanted A Full Datasheet For The New Ez-Robot Motor Control
can anybody post a full datasheet for the new motor control. I am wondering what the maximum voltage...
8
3 k
jstarne1 |
release
Windows Release 2014.10.28.00
Rebuilt Synthiam ARC to address missing examples and reported lockups from yesterday's build.
2
4 k
Dunning-Kruger |
question
Error Weather Broadcast
is that cause i dont have voice recog?
16
4 k
Nomad 6R |
question
ARC Bug?
I have two EZB v3 connected for my project. When I connect to EZB 1, there is an error message that shows up in the console that states it is NOT an EZB? It reports that EZB 1 reports back with OS v25.5...
5
3 k
gwen4156 |
question
Deal On Tiny Bt Joystick
I have no idea how well or even if this will work with ARC, but I ordered one to try since the price is right. If you are looking for a small hand-held remote for your EZ-Bot, Woot has a key-ring size Bluetooth joystick today for a decent price: electronics.woot.com/?ref=cnt_sb_el_1
7
3 k
thetechguru |
question
Running 2 Robots In Client Mode At The Same Time
I have 2 robots and I have each one setup to run in Client mode. When I try to run them both at the same time, I can only...
11
4 k
bhouston |
question
Next Week?
I have been waiting since September 18, 2013 - 7:47:48 AM! Order is stuck... At Step 2 of 4) Processing Order Details roli and batteries Contact US "says next week..." it has come and gone. I am tired of everyone saying you know the drill. Would you rather I post on face book? Or g+... J
55
8 k
Dunning-Kruger |