All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion and reporting end-effector location.
Featured
RedBender test robot for Synthiam ARC: EZ-B v3, wireless camera, sonar, continuous-rotation and neck servos, battery-powered prototype platform.
robot
JS1's Tracked Robot - New Project
Convert a vintage Tamiya RC Leopard into a Meccano-bodied robot using EZ software, VirtualBox VM, servos, batteries and Windows voice recognition.
19
5 k
Dunning-Kruger |
question
Robots Without Remote Control
Do you have any robot that can be programmed to operate without a computer or remote control
7
5 k
Rich |
question
Mini Mod To The Ezb(4)
For those EZB(4) users that have a vertical clearance challenge, there are a couple of things that can be done to shorten the amount of vertical space occupied by your new...
3
4 k
Jeremie |
question
Project Backup-Question
hi @ all, when I save a project and open it again, there is a problem: 1. the camera grid is in a wrong position, not in the default position. 2. the blinkM window is reseted and I think a lot of more current settings are not saving. its a lot work to change all settings after I open my project regards Marty
7
3 k
Smarty |
question
Lifelike
I am always trying to make my robot more lifelike and I got an idea that I could make him look anywhere that he sees motion but I don't know how to do it do you guys and gals. -what do you think made robots lifelike and what you could do with your robot. leave them below.
4
2 k
Dunning-Kruger |
question
Newbee Question: Power With Lipo
Hey guys ;-) Yesterday, I've ordered one EZ-B v4 (standalone) for my robot-project. At the same time I've ordered one LiPo Battery (7,4V-/1300mAh). But I...
13
3 k
Sven |
robot
Luis's R2d2 Project Ready To Document
Open-source R2D2 build: Arduino sensor controller with ultrasonic foot sensors, Razor/Saber Tooth motors, PS4/EZB control modes, rule engine
14
9 k
Zap Brannigan |
question
Rgb Array Sensor Seperation
So I just got my robots head and neck in yesterday and noticed that it didn't come with any LEDs bummer, but then I was like o well why use crappy standard LEDs when I can just use the Rgb array sensor instead to give omega more personality, but I stop to think, wait the sensor is to short to reach both eye openings, so I am wondering can the Rgb...
8
3 k
Linux robot 9… |
question
Red Button In Auto Position
Hi guys, I just updated my ARC recently and noticed a red button in my auto-position window. It's a great tool but what is it called? And how do I implement in my...
4
3 k
mankental |
question
Lsd For Synthiam
Hello,I have the screen of the cell phone htc one x , you can connect it to the ez-robot and how?
2
2 k
thetechguru |
question
Backside Servo
is it possible to set this servo also whit the front forwarts. i see all servo are clockwise placed.
11
4 k
Nomad 6R |
question
Help With An If Script For Motor Control
I need a little help with a script. Originally I had a script on the mobile interface where if I pressed a button, the motors would drive...
12
4 k
Steve G |