All Community Content
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Execute scripts on WiFi/network connect or disconnect; monitor adapter, store status in a variable and trigger custom scripts for headless SBC...
Featured
Human-size 3D-printable legs with parametric slew joints; 550 DC or NEMA17 steppers via adapter; L298N/EZ-B/Arduino control; 12 motors, runs on 6.
question
No Internet Connection Error In ARC
Hi, i get these error messages in ARC when i try to get new skills or try to make a new skill... I am obviously connected to the internet. Help?
9
3 k
DJ Sures |
tutorial
Increase Ultrasonic Distance Resolution
Improve ultrasonic sensor resolution and reduce distance reading failures with a simple quick fix
0
3 k
DJ Sures |
robot
Ezang's MEASURING DISTANCE TO OBSTACLE USING THE HC-SR04
Measure distance in inches with HC-SR04 on Arduino using Synthiam ARC serial monitor; converts pulse...
0
2 k
EzAng |
robot
DJ's Ez-B V4 Dalek
Control a Dalek EZ-Robot upgraded to EZ-B v4 with added servos for nose, ray gun and torso plungers via Synthiam EZ-Cloud app.
22
10 k
Nomad 6R |
release
ARC 2020.12.05.00 (Pro)
Synthiam ARC adds a navigation messaging system for sharing lidar, SLAM, waypoint and obstacle data between skills; enables Navigators and scripting.
6
3 k
DJ Sures |
feature request
QR Codes And Mobile Interface
Enable Mobile Interface Android App camera QR code recognition; currently limited to glyph, face and colour tracking.
0
2 k
afcorson |
live hack
Grippy Live Hack Part #1
Build a robot to test skateboard griptape, compare brands, and watch live mechanical design challenges with Shredz Shop and audience input.
1
2 k
robo rad |
question
UART TX On Iotiny
Hmm the Tx pin not the same on Tiny? I had working to roomba with EZBv4 but on tiny it saying the tx not supported on this device,Tiny.Try a different signal pin?
13
3 k
DJ Sures |
release
ARC 2020.12.02.00 (Pro)
Synthiam ARC auto-updates local subscription cache hourly, offers manual refresh, 14-day cache, and 4-day expiration prompts.
3
3 k
robo rad |
robot
Perry's Inmoov Conversion
InMoov converted to EZ-Robot - custom GUI for servos, face tracking, speech, Pandorabot AI, MS Cognitive, neopixel rings and scripting
234
44 k
Perry_S |
question
Adding Leg Servo's
Hi there, Is it possible to add servo's to the JD robot? I ask because I am missing an up/down movement for the ankles. It will make JD taller and maybe prone to fall on its face, still I would like to try it and make its gait more realistic for starters. Maybe some of you have tried it out already and know the answers. which D--pins to use for...
7
2 k
dav69ca |
robot
DJ's Trs-80 Model 100 Controlled Wall-E
Control an EZ-Robot Wall-e from a hacked 1983 TRS-80 via TTL Bluetooth; load BASIC programs over Bluetooth; EZ-SDK serial relay included.
13
14 k
DJ Sures |