Robot Building Questions
Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Control Waveshare servos (TTL/RS485): set position & speed, release torque, read position. RTS option for converters; reverse-engineered protocol.
Featured
Building a DIY humanoid JD robot with ez developer using PVC pipes and scrap parts while awaiting gearbox replacement on a Wall‑E robot
question
No Checkbox Workin
does the lewan servo's work with the iotiny? i notest that the checkbox below cant be checked.
4
2 k
Nomad 6R |
question
JD Humanoid Won't Turn On
Good day fellas, Our lab just purchased a JD humanoid. However, when we try to switch on, this is nothing happened. There is no light and no sound. We checked the battery which can be charged and it was fully charged at that time. We are trying to find the solution to it, wish someone here can provide us with some support. Thank you in advance!...
2
2 k
Nomad 6R |
question
Is It Possible To Control JD Humanoid Through A Remote PC Over Wifi ?
Normally, we can connect the JD humanoid robot with a PC where ARC is installed. I checked that the JD humanoid robot is controllable within a typical range of 10-15 meters. However, I was wondering if we can extend the range as JD uses WiFi to connect to the PC. Can we keep the robot connected to a local PC but still use a remote PC from which can...
2
2 k
Jeremie |
question
Servo Ports Not Working
ez-b v4 ports D2, D4, and D12 do not work. All of the servos work if plugged into different ports but are unresponsive when plugged into those ports. Upon initial assembly...
13
2 k
Dave Schulpius |
question
Encoder Reading With Arduino After It's Been Programmed With The EZ-B Firmware
I have little knowledge of Auduino's and their language. However...
6
2 k
Dave Schulpius |
question
Smtp Client Questions
Hey DJ, I have the SMTP plugin a go (really looking forward to using this), I seem to have it configured correctly to use my gmail account for SMTP, but when I run a script to...
26
6 k
thetechguru |
question
My Questions Are Being Deleted?
My questions are being deleted?, sad. I thought this was a community? Sorry If I offended anyone with my questions, by questions I was taught as a child this is how you learn. I did find a site https://synthiam.com/Community/HackEvents/Dimension-Engineering-Sabertooth-Kangaroo-19484 a video tutorial demonstration - just what I needed EzAng
6
2 k
EzAng |
question
Can't Connect To Camera Device
Hello, I recently purchased a camera for my EZ-B v4 controller, but I'm having trouble connecting to it. Every time I try to connect this error message displays...
25
3 k
Jeremie |
question
How Do I... Not Be Hopelessly Lost?
I'm sorry for ANOTHER stupid question, but I'm having a REEEALLY hard time following the Tutorials and searching for help in the forums here. I've...
33
3 k
Nomad 6R |
question
ARC Or ARC With Arbotix Board?
Hi, Would your hack for the Robotis OpenCM9 and Bioloid Premium work with an ArbotiX board? (Trossen Robotics). It is an Arduino based board that works with Dynamixels. I ask because the OpenCM9-C does not support AX12s and I cannot find the OpenCM9 - B for sale. I think that it had both the small XL and AX connectors. I want to learn ARC using...
11
2 k
Vjk382 |
question
Changing The Female Voice That Comes With EZB V4
Hi I would like to change the female voice that is usually announced when the EZBv4 is turned on, can I change it to male voice ? Thank you
1
2 k
Jeremie |
question
Needing 4, 3D Printed Parts Made
Hello all, my 3D printer went out. I’m hoping someone on this forum might be able to sale 4 parts for my Inmoov. I need, 2 PivconnectorV1, 1 PivmitV2 and 1 RotTitV3 for the right arm, I can email you the stl’s. If someone is able to print these, please let me know how much you would charge me? Thanks very much! Cheers
5
2 k
Redzone |