Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Localized AIML chatbot with editable AIML files, ez-script support, session memory and ControlCommand API; integrates with speech and robot skills.
Featured
Vintage Lynx robot arm reborn with EZB3, internal LiPo and Synthiam ARC for wireless control, Auto Position and voice commands.
question
ARC Has Stopped Working.
I just installed windows 7 on my eee PC 4g and installed .NetFW but when i try to start ARC i get the message that "EZ-Builder has stopped working". Does anybody know how to fix this?
6
3 k
JT |
question
Working On Brookstone Rover Hack
while i am waiting on my parts for ROOMBA project,i started hacking the ROVER since my girlfriend who bought it for me wants to see it finished quick i tore it down and looking to add servos ,EZB and some sensors to it will post some photos of my changes very soon,have mostly all parts needed for the hack
1
2 k
robotmaker |
question
Laser Pointer!!!
we can use this right....with a digital port.....on and off correct? laser pointer
7
4 k
Choyster |
question
Switching Transistor
I'd like to control a small DC motor pulling from a 7.2V battery using a switching transistor connected to one of the EZ-B digital ports and wanted to be 100% sure I was doing this...
4
3 k
bret.tallent |
question
Omnibot 2000 Replacement Arm Or Motors Inside?
I'm trying to get a wrist and claw to work and I believe the motors are just corroded , where can I get replacement motors? They look very generic to me. Thanks.
1
3 k
MikeDC |
question
Record Function
Hello DJ- I had an idea that I think might be a cool addition, and I don't think it would be too hard to implement.. I was playing around with the "Touch Map" control to control my robot to travel following the spline and this is what made me think of a "record" function. What I'd like to see is a "record" function...
4
2 k
DJ Sures |
question
About The Mp3 Trigger Board
since it uses serial ,can any MP3 board work ,one from sparkfun is almost $50 and bought one for another project about the same it uses serial SOMO-14D by 4D systems for $25 and uses SD card too somo-14d mp3 board
0
2 k
robotmaker |
question
Project Magnus: Questions
To DJ Sures I am honored and humbled sir that you showcased Project Magnus. Thank you. I have a couple of questions for you and the guys: How would you rate the video quality of the camera that comes in the kit? I will need to steer Magnus when he is out of my line of sight. Is there much delay in the transmission? Do you have any step by step...
4
2 k
rgordon |
question
So No Sound Sensors In Our Bots Because Servos Are To Loud...
so how do you make the bot "look" in your direction when you speak to him? if i say...
5
2 k
ww321q |
question
Over Heating
DJ, I have managed to hook up alot of servos and I find that the voltage regulator overheats and the servos will no longer hold their respective positions. If I shut them down for a few minutes...
13
5 k
jstarne1 |
question
Friday Night Chat - Come Join In!
If this is ok with the DJ & the EZ-Robot Community; I was wondering if we could have a Friday Night Chat - Come Join In! Friday March 9, 2012 9pm EST...
10
4 k
GotRobbed |
question
Omnibot 5402 Tray
Hey, Does anybody have a tray i can use for my omnibot? I am willing to pay for it.
12
4 k
MikeDC |