Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
TCP server for ARC accepting EZ-Script, JavaScript or Python commands, letting controllers send commands and receive line-terminated responses
Featured
Convert used robots into IOTINY+camera donor units for durable, kid-safe hands-on robotics demos and classroom projects.
question
Ezb Restarts And Servo Movements
This Video Show my problems I have problems with my hexapod. The robot makes uncontrolled movements every time the ezb is restarted. (as soon as I control...
29
3 k
Jeremie |
question
Can You Make A USB Camera Work With Ezb Controller
Does anyone know if you can a turn a USB camera to work on an EZB controller? thank you in advance.
5
2 k
Redzone |
question
Looking 4 Elvis Alive Microhone Controller
Looking 4 Elvis Alive microphone controller If anyone has a functional WowWee Elvis Alive controller, I may be interested. Thank you
4
3 k
Nomad 6R |
question
RESET NETWORK WIFI
This could be a dumb question but has something changed for pushing a button on EZB4 to reset network and then getting on the EZB website to configure AP mode back to Client mode? there used to be a where you click at the top left of connection window that would go to the configuration web page, Now can't find it? IP address also not working when I...
6
2 k
Nomad 6R |
question
ULTRASONIC EZ Robot Sensor 3 Wire.
Just wondering if my one EZ Robot ultrasonic sensor with built in voltage regulator, 3 wire connector,is still working. Is the red light supposed to be on all the time or only when a digital port is on?mine has no lights and nothing on the Arc sonar window. PORT on or off same thing,nothing.Could be bad regulator,possibly works if I remove and just...
3
2 k
robo rad |
question
Adding Pre-Programmed Dance To Robo-Scratch
Hi there, I have spent half the day researching and toying with an issue with a program for the JD Humanoid. I am pretty sure it's...
6
907
DJ Sures |
question
MPU9250 Accelerometer, Gyro, Temperature, Compass Upgrade Request
@DJ, I know I have this open under feature request, How hard would it be to use the...
9
2 k
Redzone |
question
Some EZ-Robot/Synthiam Hardware And More For Sale
Greetings, all, long time no see. I've decided to sell off a portion of my robotics hardware. (Please advise if this post...
1
2 k
Nomad 6R |
question
Tuttorial About Talk Servo For Leds
hi is there a window for talk servo with led?insteadt of inmoove mouth opens, while talking,but with a led then.
119
9 k
EzAng |
question
Weather RSS Through Iotiny Speaker
How do I get this to come out of the IoTiny speaker? SpeakRSS("https://www.rssweather.com/zipcode/44310/rss.php", 1) I tried SayEZB several different ways but no luck. EZ Script please Thanks
2
2 k
DJ Sures |
question
Wireless Connection To Arduino?
I’m building Spot Micro Next. The base design uses a Arduino Mega. I’d like to use ARC to program the robot. Has anyone worked out how to wirelessly interface to an arduino with ARC?
11
2 k
MarkTheBotBldr |
question
EZ Robot's Newest HDD Servo
I have a question about running the EZ HDD servos heavy duty, The specs say 7.4 volts to 8.4 maximum volts operating range. So if I am running the EZB4 the output servo voltage will always be same as input battery voltage. Now I have 2 type of Big Amp current battery a 7.4 Lipo 5000 Ma 50c burst charge( running great 5 years no problems) but I also...
4
2 k
robo rad |