Robot Building Questions
Synthiam ARC Pro is a new tool that will help unleash your creativity with programming robots in just seconds!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Customizable inverse/forward kinematics editor for robot arms: add joints/bones, map XYZ in cm, auto-calc joint angles for precise 3D positioning.
Featured
Control EZ-B robots from web and phone using a Node.js module via Synthiam ARC TCP interface with jQueryMobile and Bootstrap UI
question
Navigator With Mecanum (Omni) Wheel Robot Platforms
Has anyone played with Robot platforms that use Mecanum wheels and navigation and tracking? My Roomba, Turtle bot,...
22
3 k
DJ Sures |
question
How Can I Use GNSS RTK + IMU To Record And Set A Perimeter?
Hello all, looking for some help. How can I use a GPS GNSS RTK module to record a parameter for a lawn mowing robot? Then once perimeter is set, the robot sees this as a geo fence barrier so that the robot does not need boundary wires. Also how can I utilize two GPS units, one for the base station and one for the rover? This video shows exactly...
5
2 k
DJ Sures |
question
Can I Use Multiple Bluetooth Devices?
Got it working and I like it!! It was not so much the print function as it was getting the number into a variable. Now of course the next step,...
4
2 k
Automation Man |
question
Best Way To Add Servo Ports To Lattepanda?
My question I hope will be simple to answer. I am using a Lattepanda V1 SCB in my Inmoov build the SCB is located in the head and I...
8
2 k
DJ Sures |
question
Would This Work With An EZ-B V4 And Arc?
Hi, Just wondering if EZ-B V4 and arc would drive this type of servo/ stepper?, >> link
27
3 k
DJ Sures |
question
What Kind Of Lidar Should I Get?
Hi @DJ, Probably off topic but if you were to purchase a LiDAR for ARC, would you buy the Hitachi-LG LDS or the RPILiDAR A1 . The link at top of this page...
16
2 k
DJ Sures |
question
Battery Little Puff Up- Can't Charge
One of my EzRobot battery is dead, can't charge Do I just throw it away in the trash? What other battery can be used?
25
3 k
Nink |
question
Microphone Audio
Does the Voice Activity and Microphone audio only work with the EZB4 soundboard and not the Pc soundboard?
8
2 k
DJ Sures |
question
Advice Need For Hasbro R2-D2 Hack
Hey guys. Hope everyone is cool. I’m looking to start a new project and need a quick bit of advice and/or information from anyone who has hacked a Hasbro...
13
7 k
Jeremie |
question
Connecting EZ Camera To PC Via USB
Is is possible to connect the EZ camera to a PC via a USB port? Or is it easier to buy another one such as......
11
3 k
Jeremie |
question
H-Bridge For 4 Motors - Robot Car
I understand how to connect a IO tiny, ez-battery, ARC , H-bridge motor controller to two wheel robot car, easy. Now I have a robot car that has 4 motors,...
19
17 k
EzAng |
question
How Do I Interface With This LCD Display?
On the back of my Robot spot I have an 16x2 LCD display. I need to interface with it so I can display information about the robot and what...
7
2 k
DJ Sures |