Robot Building Questions
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Send robot status alerts to iOS, Android and Windows via Pushover.net. Configure User/App keys to notify on low battery, stuck or task events.
Featured
Conversational AIML robot that answers questions with servo-driven eyes and mouth, DF Robot Hexa Base Rotate head, Arduino running DJ's firmware
question
Mini-B B9 For Sale
This one really kills me, but for personal reasons I must sell off my Mini-B - 2 foot tall robot b9 from Lost in Space. I combined the Trendmasters robot B9 with a rad drive train and...
5
4 k
JustinRatliff |
question
Dynamixel Actuator Support?
Excuse me if I have posted this in the wrong place. I have read many messages regarding whether ez-b could support the Dynamixel actuator. I believe DJ ordered one back in October 2013 to experiment with it. Although probably not many ez-b users use them because of their cost and lack of serial support, they have been used by every major...
9
3 k
hoolagen1 |
question
Lots Of Robot Parts For Sale!
I have a huge inventory of robot parts that need to go. Servos, motors, pan/tilt bracket with servos, batteries, connectors, wires, sensors, resistors,...
15
4 k
bret.tallent |
question
Ezb/Project Biped Hybrid & 3D Printing
Hi Everyone, First real post! Couple different topics I was wondering if anyone is aware of Project Biped (https://www.projectbiped.com/home). Just discovered this today. Seems like this project has made some awesome advancements with leg design and movement . Self stabalizing being the most impressive. Its a great open source project. I am very...
4
3 k
Ings175 |
question
Hello Ezb Community!
Hi Everyone, I am completely new to robotics. Just discovered this whole world of diy robotics this week. I already have some ambitious plans and hope to utilize the ezb platform to exact them. I discovered the world of 3D priting this week as well. I always thought 3D printing was an unexcessible technology unless you were loaded. I discovered the...
4
2 k
NeRvKil |
question
Get Started With Ez-Robot Revolution
Watch "Get Started with EZ-Robot Revolution" under learning area. Great intro video on v4. Rate 4 1/2 stars out of 5 stars. J Updated: watch video now...
7
3 k
A.Bautista |
question
Snow Blower Robot
Hi, I just stumbled on this website and am truly amazed at the concept and the possibilities of building our own robots! I am thinking of building a snow blower robot that is powerful enough to tackle large and heavy snow like a foot to 14 inches. Ideally I want to automate a two-stage gas powered snow blower to run autonomously via remote control...
1
2 k
thetechguru |
question
Good Base For An Ez Robot Project?
What do you all think? I have the files to get the 3d parts printed so wondering what everyone thinks. https://www.3ders.org/articles/20131021-poppy-open-source-3d-printed-hackable-humanoid-robots.html
5
5 k
Rich |
question
Running Multiple Scripts
i have a script for jaw movement and a script for the say wait movement only one script can run at a time. in other words either the servo jaw runs or the voice comes out not both, how do you fix this
2
2 k
irobot58 |
question
Gunslinger Bob For Sale
Due to personal reasons I am forced to sell off my robots. Here is Gunslinger Bob. He is a modified omnibot with a rad head. He has an airsoft machine gun and nerf cannon for...
1
3 k
bret.tallent |
question
Rolli+Jd Configuration
this one catsh my eye .i have a few questions. will there be other colors availeble in the future. is it possible to ad a lcd in chest whit image/video what he sees. does the...
50
7 k
Nomad 6R |
question
Cyborg Name Decoder Post.
Someone posted theirs in another thread and it seems like it's starting to be popular so, not to hijack his thread I started this one. You can find the CND here....
11
5 k
Troy |