Robot Building Questions
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Persist and auto-load specified global variables between ARC sessions for consistent, personalized robot behavior and quick state restoration.
Featured
Merge an MGA-1 Quadtrax with a Robosapien torso: hack the circuit, remove canopy, mount torso, run on EZ controller then upgrade to new controller.
question
Ir Watsh
hi all.has anyone use this or know how to program this watsh.it has an ir signal.
1
3 k
Nomad 6R |
question
$500 3D Printer
https://revision3.com/tekzillabites/da-vinci-printing-ces-2014 I cant wait to get my hands on this thing!
6
3 k
jstarne1 |
question
Self Navigating Flapping Drone
For those who haven't seen this article.... Flapping Drone!
1
3 k
stonewolf |
question
Submarine / Rov Robot Ideas?
Has anyone built a sub / ROV and wants to share the design?
4
3 k
Antron007 |
question
Swamped With New Robots For Ez-B Modifications
My " friend"? found two RC type robots at a garage sale for next to nothing, a roaring Trex and a V2 Robosapian in...
17
5 k
Nomad 6R |
question
2 Omnibots For A Bargain Price
Check this out: https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=201021690539&ssPageName=ADME:B:SS:DE:3160 Mike
5
2 k
MikeDC |
question
Roboearth
Interesting read. RoboEarth.org
3
3 k
Antron007 |
question
Ez-Office Cameras
Are the live office cameras going to be turned back on? No big deal, just wondering.
1
2 k
DJ Sures |
question
Ez Bits (Specifically Servos) For The Hexapod
I am going to attempt to use one of my v3 ez-board to control this hexapod. I have just about finished the print. Now I need to put servos in in the ez bits what servos do I need to get to fit?
5
3 k
Nomad 6R |
question
ARC Online Help
We have been building an online help with video tutorials for ARC. If you have any suggestions or questions for tutorials, let us know. You can find the online manual under the EZ-Builder...
59
8 k
rowdyjoe |
question
Ez B & Xbee Connection Question
Hi, my name is Eric I am having trouble getting ARC connected to the ez board. I am using 2 xbee instead of Bluetooth. I can get the xbee to communicate with each other using DIGI software but not to ezrobot. Baud rate for the xbee is 9600, I am not sure what it is for ez robot? The com 3 port shows in ARC but the pop-up saying there is no...
10
3 k
Jeremie |
question
Magnetic Rotary Encoder
Found this. It may be of interest to some. Thought I would post it. May can use it with the EZ-B. Quote from web site: "It uses an AS5040 magnetic rotary encoder to measure the absolute position of the rotor of whatever motor you're using. This is actually pretty exciting. Powerful servo motors are expensive, but with one of these, you can use...
2
3 k
irobot58 |