Robot Building Questions
Become a Synthiam ARC Pro subscriber to unleash the power of easy and powerful robot programming
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Synthiam ARC-compatible OpenCat quadruped build using MPU-6050 for stability, Thingiverse STL/Nibble parts, mini servos and HuaDuino controller
question
Checking Volt Device
hi ,does anyone know off excisting devise you can plug on the 3pin wire, to see howmany volt still is in the batt.
8
3 k
Nomad 6R |
question
Adruino
how do i get ez-bot v3b too chat with an adruino uno
4
2 k
stibaer |
question
H-Bridge Question With Ez-B V4
Hello EZ-Robot Team, i have follow problem: I have a remodeled Omnibot 2000 I have successfully operated with the ECB-V3 and the H-bridge. Now I have changed to the EZ-B V4 and since then he moves only very slowly. When I use the PWM controller to Max. Point moves the robot extremely slow. I place the PWM regulator to slowly he drives no longer....
4
2 k
DJ Sures |
question
Ez-B V4 And Camera Combo
Hi, I want to know if your products can make a line follower with Quadcopter? Thanks.
8
2 k
CardboardHacke… |
question
Serial Terminal Ezb
Two questions here. This information below is coming from a Arduino, that is running 3 ultrasonic sensors. (1.) In the picture below, what are the numbers and letters for that appear...
1
2 k
DJ Sures |
question
Programming And Wiring
Hey all, I kinda have a two part question that I have just wondering.... 1) When it comes to creating the scripts, is there some sort of program flow that helps you create the...
6
3 k
RoboHappy |
question
Would You Like To Sell Your Omnibot 2000?
Hi robot makers, I search a Omnibot 2000 incl. Master Control Unit. Would you like to sell your Omnibot 2000? Please contact me. thanks Smarty
0
2 k
Smarty |
question
Camera Click Servo Plugin
I installed the Camera Click Servo Plugin, set up the servo info and then when I attached it, it automatically attached to Camera 2. (it wasn't even powered up) I have 2 cameras on my project and I need it to attach to Camera "1". I don't see a way to change the camera to the one I want.
2
2 k
bhouston |
question
Myo Armband
Hi, a really short question: Can i controll the JD with 2 x MYO Armbands? Or for later can i controll the left arm with one MYO and the right arm with a MYO but his time from a InMoov? Boris
10
4 k
Bravia |
question
Jd Will Not Turn On
I have the JD humanoid robot and I charged the battery and it still does not give any indication of being turned on when I flip the switch. I do not know if I am doing something...
6
3 k
DJ Sures |
question
Combining Ezb Programs
Hey DJ, or anyone else..... Need a lil help here, Using the EZB software, is there an easy way to combine bits and pieces from different programs to into one larger program? What I want to do is this; I created a small program using the RGB Animator. I also created another program that runs a Arlo mobile base. I also created another program that...
2
2 k
RoboHappy |
question
Sound Servo Speaker Error
@DJ. Hey buddy. I've come across a bit of a bug with the new "Sound Servo Speaker" control. Running on ARC version 2015.11.25.00, when I add the control to a...
4
3 k
Steve G |