Robot Building Questions
Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Duplicate and synchronize commands from one master EZ-B to multiple slave EZ-Bs for simultaneous, mirrored robot actions.
Featured
Tiny Roomba robot Red Poppy with Controller IO, temperature and light sensors to amuse your cat.
question
Servo Profile In Lessons
I was about to post a few tips on starting to build and use the Six robot in one of the threads (since I just put one together) when I realized the Servo Profile step was missing from the lesson steps. Looking around, the only references to it I found had to do with JD and a couple having to do with loading one from mobile apps. In the lesson steps...
4
3 k
DJ Sures |
question
New Six Camera Failed After A Few Minutes Of Use
I just got a new Brookstone SIX. After assembly, I was starting to use it, and the camera suddenly stopped working with this...
16
5 k
WBS00001 |
question
Master Control Unit For Omnibot 2000
hello all, I have to search a remote control up and running for my robot OMNIBOT 2000 impossible to find one on ebay, no one sells? Is that-among quelquin you have a sell me? or moin indicated pourais or I buy one. thank you sincerely eric
0
2 k
bernard eric |
question
Some Great Idea Maybe
would this be something for the ez robots.
2
3 k
Nomad 6R |
question
Set(Digital Port,On/Off) Questions
I'm having a problem getting the Set(digital port,on/off) to work. If I run this code, it works....once. Set(1.D22,on) Sleep(300) servo(1.D22,90) sleep(5000) servo(1.D22,40) sleep(5000) servo(1.D22,90) sleep(5000) servo(1.D22,130) sleep(5000) servo(1.D22,90) sleep(2500) Set(1.D22,off) When I run it again, the servo does not move. The code runs...
9
3 k
bhouston |
question
Selling
talking about selling.1000 units in less then minut.
27
7 k
thetechguru |
question
Soundboard V4 And Speaker In Ezbv4
Okay, I finally fired up the EZB for the first time. Took a while to figure out how to connect it and ultimately it was in fact the antivirus and the forum pointed this out. I wanted to do something as simple as possible. I want to play an audio file when a button is pressed. I put in the Soundboard v4 control loaded one .WAV file. It does not...
5
3 k
DJ Sures |
question
Ezbsay() And Say()
Why is it my pc sound card works off the say script but I don't get any sound off the sayezb script. I wrote script and when I changed all the sayezb (" I see a") to just...
26
5 k
Dunning-Kruger |
question
Sitting Position Changing During Initialization
Hello All Yes! I got my DJ :-) did assembly and servo calibration... play with him a little and close connection and turn DJ off in sitting position Some time after, I turn it On again and then the sitting position change like a yoga man then I connect via ARC, open my project and now my DJ is taking another position (standing with straight arms...
5
2 k
DJ Sures |
question
Unable To Install ARC
I just upgraded to Windows 10 and now upgrading Ez-robot is not possible. The software attempts to uninstall my old installation but tells me I have an invalid install package. I...
18
5 k
thetechguru |
question
Suggestion For Revolution Tutorials
Just a quick suggestion. I think the Servo Calibration instructions should come before the assembly instructions in the tutorials. I just got a new Six from Brookstone, and because I have some experience, I calibrated the servos before starting assembly. It is a good thing because one of them was off by 90 degrees (and most were off by one or two...
4
3 k
thetechguru |
question
These Guys Need Some V4's
Impressive group of robots. https://www.facebook.com/Sydney-Robot-Workshop-129941170519078/
1
2 k
DJ Sures |