Robot Building Questions
Unleash your creativity with the power of easy robot programming using Synthiam ARC Pro
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
22oz Vacuum Insulated Bottle
Keep liquid away from my robots! Vacuum insulation is a big deal if you care about beverage temperature change during...
Featured
Stream All The Video Sources
Stream all video sources from any URI protocol or codec (RTMP, m3u, m3u8, Mkv, MOV, mpg, etc.). The video stream is sent to the selected...
Featured
How To Use Roborealm For Indoor Navigation
Ok, so I finally sat down to look at what RoboRealm can actually do other than just face and object recognition.... I was playing with the...
question
Script To Select Camera
Hi, Something is terribly annoying : ARC resets its default camera so if you are using a different camera than the ezb camera, any script that is supposed to boot your cam and then start it in the camera settings will not activate the one you want. Is there a way to select a camera in the list as default and lock it so it stops bugging me like...
41
7 k
elfege |
question
Projects On The Cloud
Is there a way to remove a project/app from the Cloud? Thanks.
3
2 k
Dave Schulpius |
question
Servo Synchronization: Servospeed Delay Values
I need to synchronize the servo movements between a EZ-Script and an external device. ServoSpeed (Dx, speed) The speed is 0 =...
16
6 k
ptp |
question
Another Way To Auto Release / Restart Servo
Last week we had a discussion about buzzing servo and capability to release it without loosing the mechanical position of the...
15
4 k
ptp |
question
Question With Release() Command
Greeting all, It has been a long while since I posted here. I have been working on my Inmoov whenever I can find time, which is not a lot, but slowly, very...
28
6 k
MovieMaker |
question
Robonova Servo
Hi. I have planned to use ez-b4 for my robonova-1. It uses Hitec HSR-8498HB servos. Normal servos turning 0-190 by 1-2ms signal These servos turning 0-190 by 0.55-2.45ms signal. So It turns by...
8
3 k
thetechguru |
question
Ezb To Control Adruino
Anyone have any idea if its possible to fire an Adruino routine using just 1 digital signal pin of the EZB. I have a Arduino doing a simple little servo routine with 10 small servos, and dont what to waste 10 output pins of my EZB. Looking for the output of the EZB to signal the Arduino to start, just like pushing the reset button on it. I could...
5
2 k
thetechguru |
question
Builder Wont Open
My son and I made our first bit of progress last night by getting our little bot up and going. But when we opened builder this morning, we noticed the update available tab flashing so we clicked on it. it took us to the download page which we did and everything went normally until we clicked on finish to exit the installer. The little hour glass...
31
4 k
sv.jgalloway |
question
Goto Last Loop Variable Goto + Variable Goto($Variable)
Has anyone figured out way to get the goto() function to work with variable so it can goto the last defined...
42
7 k
Dave Schulpius |
question
Cybot And Running Multiple Scripts
Cy_MainTest1.EZB Hopefully,the file uploaded ,my first time. Looking for a little help. Since I am still learning much about Ezb script writing, I have...
4
3 k
RoboHappy |
question
Ezb-V4 Power
For a Roomba application, will the EZB V4 handle the unregulated power input in the same way the EZB V3 could? I saw one discussion where the EZB V4 smoked after trying this....... https://synthiam.com/Tutorials/UserTutorials/115/1
3
2 k
MarkTheBotBldr |
question
Using And H-Bridge 2.5 Amp Motor Controller To Control Stepper Motors?
Ok...I am trying this again - hopefully someone can help me figure it out... I...
28
9 k
TNMike |