Robot Building Questions
Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
USB control for Pololu Maestro (6/12/18/24) via ARC Vx ports. Maps Vx to Maestro channels; supports position, speed, acceleration, release.
-635396587467336392.jpg)
Featured
Control Roomba power via EZB + 5V relays, run SCI commands and sensor diagnostics using Synthiam ARC's UART terminal and startup script.
question
Ssc32 Strange Error Message
I have question for the use of the SSC32. In the screen shot. under the script "initaArms:' you will see an error message that says " Missing Binary...
6
3 k
RoboHappy |
question
Foscam F19831p Useage With ARC & ARC Mobile
Hello All, I searched on the forums for Foscam Posts and found some good ones. However, the setup doesn't work for me. I know the IP Address of the IP Camera and it is on the same network that my robot is on. I entered the IP address into the camera selection field in ARC and started the camera but no video stream. I have the Foscam camera set to...
7
3 k
rbonari |
question
Servospeed
i see the servo speed is diff as usuall ? its for the init start for roli. is it servo(d12,$speed) or servo(d12,4)
5
3 k
Nomad 6R |
question
Speedroli With
here tail lights for the roli or other drive robots.it took me 2 days to find it,
4
3 k
Nomad 6R |
question
Camera Control From My Plugin
Hello , I want to control the JD camera from my visual studio plugin , I've try the following code but it doesn't work EZ_B.Camera.GetVideoCaptureDevices(); plz I...
28
5 k
ptp |
question
Time Out
i cant get the new ezbv4 connect.i gess there a time out,averyting goes well, untill the voice on ezbv4 starts speaking,then the led goes red.
56
7 k
Nomad 6R |
question
How To Connect Inmoov On Ezbv4 ?
Hello to everyone in this forum ... First I want to thank all the contributor on EZBv4 with Inmoov ... I'm more comfortable with the French language than...
19
5 k
Aerius |
question
Slower V4 Response Time
Hey guys I have a question/ am curious about something. I have 3 V4 boards and 2 of them work great. One of them has a serious delay while running ARC scripts. the script...
14
5 k
robot56 |
question
Roomba Connection
I recently purchased a EZ4 board and I was anxious to use it. I went through two cables (mini din to molex) both of them traced correctly but yet I got nothing when I went into ARC. The...
70
14 k
rbonari |
question
Voltage Supply And Regulator Questions For Ez-B V4 Controller, Servos And Sabert
If the Voltage input (Vin) can be between 4.5 and 16 VDC...
5
4 k
DJ Sures |
question
Roli Rotation Servos Get Hot After A Short Period Of Time
Hello! The rotation servos on my roli robot get rather hot after a short period of time (10 - 15 minutes) when they are not moving, and make a low humming noise, jolting through the 'dance' movement, it is not one smooth motion. I just wanted to ask if this was normal, and if not, what can I do to stop this. Thanyou for your time. E11iot1
4
2 k
e11iot1 |
question
New Products: 16-Channel 12-Bit Pwm Servo Shield & 8 Channel Infrared Detector S
Good Morning Everyone, I came across a couple pieces of hardware I am going to utilize in my R2-D2 Project. I was wondering if anyone has seen these, and if there was any scripts written with ARC for this hardware. I am going to use the Arduino DUE & UNO Hardware: FIRST: 16-Channel 12-bit PWM Servo shield I2C interface PCA9685...
14
6 k
DJ Sures |