Robot Building Questions
Synthiam ARC Pro is a new tool that will help unleash your creativity with programming robots in just seconds!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Example NMS Level #1 navigation skill showing subscription to combined scan+location data, displaying position and scan info; source code included.
Featured
Build a physical JARVIS robot with RAD V1 and EZ-B using Synthiam ARC, scripting and house automation integration for interactive control.
question
How To Control Tank Tracks Without Skid Turns?
How to Control Tank Tracks Without Skid Turns? I am planning to use an Arduino Uno with EZB firmware and two H-bridge controllers, one for each of the right and left track motors, with PWM speed control. The way I want this to work is with a single joystick control: - For a right turn: the left track moves forward, and the right track moves...
4
841
DJ Sures |
question
How Do I Assign A List Of Values To An Array Using Script Language
How do I assign a list of values to an array using the script language in Synthiam ARC? For example, I want to create an array like this: $MyArray = ["value1", "value2", "value3"].
2
653
Athena |
question
Rplidar A1 Does Not Return Data
Hello! I am using ARC on a Raspberry Pi 4 running Windows 11. The RPLidar A1 function starts automatically as soon as the USB from the Lidar is plugged in....
6
2 k
OpenField |
question
Using A Variable In Waitforspeech Command
@Athena, How can I use a variable in the WaitForSpeech command? For example, I want to use $Exhibit = WaitForSpeech(30, $ExhibitList), where $ExhibitList contains several options. How can I achieve this?
5
827
afcorson |
question
Whats The Best SBC Under $300 To Build A DIY Two Wheeled Robot With A RP LIDAR
What is the best single-board computer (SBC) under $300 to build a DIY two-wheeled robot equipped with an RP LIDAR? I am considering using a Raspberry Pi 5 with Windows 11. Could you please direct me to any reference wiring diagrams that I can download for a project like this?
1
782
Athena |
question
Raspberry Pi Digital Ports
hello! I've got this msg setup is: RPI 4 + L298 + Dc motor + 6V Batt supply, ARC installed on Win 11 RPI, Dual H-Bridge function used. below the config: L298 left...
6
901
DJ Sures |
question
Can I Remote Control My JD Humanoid With A Steam Deck Controller ?
I have a JD Humanoid robot, and I would like to control it using a remote control. Is it possible to control my JD Humanoid with a Steam Deck controller?
2
821
Jeremie |
question
TTS Not Finishing
Hi everyone, I have just dusted off my ALTAIR robot and loaded the latest version of ARC Pro. I then ran the last ALTAIR code, which used to work perfectly. However, I encountered a major problem: virtually all Text-to-Speech (TTS) commands never complete. For example, the phrase "I am ALTAIR robot" only outputs "I am ALTAIR...
6
665
DJ Sures |
question
Best Way To Connect A 12V Servo To The EZ-B V4
@Athena, what is the recommended way to connect a 12-volt servo to the EZ-B v4? The stall current of the servo is 8.0 amps. How much current can the EZ-B v4 safely supply? Additionally, I want to ensure that the connection integrates well with the Movement Panels and other plugins in Synthiam ARC.
5
814
Athena |
question
Cant Find Ip Adres
Hi, I am having trouble locating the IP address of my new IoTiny. I believe it should be something like 192.168.0.???. It does not connect, whether Norton is enabled or disabled. Can...
18
2 k
Nomad 6R |
question
Can Not Build Robot
Hello, I am trying to start building a robot, but the instruction view says "Completed" in the top left corner, and I am unable to proceed. I have not set up anything yet...
11
898
Athena |
question
JD Robot Rolling
I am curious if it is possible to modify the JD robot to enable it to roll instead of walking, similar to the functionality of the Roli Rover.
4
776
Nomad 6R |