Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Queries NMS Navigation2D scans for range at specific angles or arcs, returning latest distance data...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Queries NMS Navigation2D scans for range at specific angles or arcs, returning latest distance data for obstacle and path planning.
Featured
Human-size 3D-printable legs with parametric slew joints; 550 DC or NEMA17 steppers via adapter; L298N/EZ-B/Arduino control; 12 motors, runs on 6.
question
Cognitive Face Question
Hi everyone, I was wondering if there is a way to delete one's face after it has been learned by the Cognitive Face program. The reason is, I was testing it out, getting the hang of it, but during testing it out, I used a test name for my face, because I was just seeing out it works. I then had it Learn my face again with my name. Now it recognize...
6
2 k
EzAng |
question
32X2 Sabertooth
Whats the biggest wheelchair motor i could use? Trying to build an rc motor with a sabertooth 32x2
17
4 k
fxrtst |
question
Looking For Input For Relays?
I need to find a source for relays that folks have used. I looked up a few of the posts but unsure of a source for tested and working relays from say, Amazon. If anyone is using a relay and can chime in with a particular make and model would be great. I'm using an ezb to turn on and off 12v motors?
3
2 k
fxrtst |
question
PHOENIX CODE Plugin
i am looking for PHOENIX CODE plugin for spider and quad robot. it make`s the setup better easier. the software works with arduino and i like too use the ez brain is an plug in...
10
3 k
michel pet |
question
Inmoov Heavy Head And How Do Other Inmoovers Cable Their Robots?
Hi everyone Very interested in how you all approach the InMoov arm wiring and hiding the...
26
7 k
mayaway |
question
2 Iotinys With Camera Power Needs
I built a D-O droid and has a Iotiny to run 6 servos and a speaker, once the sounds are known. It has a very thin head support that barely fits two servo...
1
3 k
Jeremie |
question
New Roomba Movement Panel In Mobile Interface
Hi all, I am building a robot to watch my cats as i leave for vacations, and want to use a roomba 500 series because of its...
3
2 k
DJ Sures |
question
JD Robot Occasionally Spasms When Closing ARC Without Disconnecting First
Sometimes, when closing ARC, JD's servos violently spasm and rush towards their limits. However, I noticed this doesn't happen when it's disconnected first before closing. I don't know how to replicate this problem nor do I know why it occurs. Has anyone else seen something similar to this before? Or have any suggestions on how to go about fixing...
2
2 k
vincent.j |
question
Error Updates Plugin
Thank you to all the communities who guided me in my questions, but I encountered the correct error in uploading the plugin. The first time I uploaded the plugin, I mistakenly...
5
2 k
MTP |
question
Been Out Of The Loop For Years, Have Questions
I've been out of the EZ Robot loop for several years. Recently, someone followed up on a forum post I made, and it reminded me that I still have one of these things. It seems that a few things have changed, so I have some questions to get up to speed. 1. It looks like the new Synthiam isn't a brand change, but an addition to the business or...
3
2 k
DJ Sures |
question
Camera Resolution And Face Detection
Hi, Can you tell me definitively what the resolution of the camera on the JD Robot is? Information online suggests it is 640x480, but when first connecting in ARC the resolution defaults to 320x240. This can be changed to 640x480 with the connection controls, but I do not really see any difference in the image when it is increased. Also, if the...
5
3 k
AlexR |
question
[?] The Ezbv4 Can Have Any Ip Address You Want, As Long As It's 192.168.1.1
I'm trying to get my laptop to connect to an EZBv4 and my regular wifi at the same time. Which I can actually do, since I am using a USB -> WiFi adapter. However, my network is also in the 192.168.1/24 range. I thought I would just connect to the EZBv4 and change it's IP scheme/address and all would be fine. Nope. No options to. After poking...
14
4 k
DJ Sures |