Robot skill for you to try
iRobot Roomba Movement Panel by Synthiam Inc.
Control the iRobot Roomba and read sensor data. This skill currently works with the 500 series robots and iRobot create. The baud rate and connection type will need to be configured in the settings...
Live Robot Building Hack Events
live hack
Hacking Robotis Opencm 9.04 With Bioloid
I will be hacking the Robotis OpenCM 9.04 controller with EZ-Builder using a Bioloid. We'll install the Arduino OpenCM library and connect...
6
2 k
Mickey666Maus |
live hack
Botmatrix Live Hack Session 10
The Power Glove is so awesome! But why should a classic piece of hardware be kept on a dusty shelf?!? I'm going to do my best like to give the power glove new...
0
464
Jeremie |
live hack
DJ's Apple II Pi Hack (Part 2/2)
In this hack, I'll continue the Apple II conversion to the Pi. I created an Arduino PCB that converts the Apple II keyboard and 16 pin analog joystick to...
0
889
DJ Sures |
live hack
DJ's Apple II Pi Hack (Part 1/2)
Remember my Apple II computer from a previous live hack event? Well, I'm going to add a Raspberry Pi to it's guts and use an Arduino to connect the Apple II...
1
775
DJ Sures |
live hack
DJ's 8Th Live (Not) Hack... We're Playing Games!
I was sick with a massive head-cold and made it through without overdosing on NyQuil last week and skipped a live hack...
6
712
JustinRatliff |
live hack
Botmatrix Live Hack Session 8
Tonight's live hack session I'll be working on the EZ-Robot interpretation of the Short Circuit Johnny 5 robot! I'll be assembling the pieces and then working in...
4
584
Jeremie |
live hack
Botmatrix Live Hack Session 7
Tonight I'll be finishing some hacks on an interactive R2D2 toy I bought some time ago that I hadn't finished. I'll be focusing on hacking the on-board ultrasonic...
7
750
Jeremie |
live hack
Botmatrix Live Hack Session 6
Even though I have a bunch of projects that are half finished, I do have another project idea that I'm excited about: Converting a VHS tape into a Robot! If you...
12
904
fxrtst |
live hack
Botmatrix Live Hack Session 5
I am determined to make Voltron walk! I'm printing new bracket designs to bring his height down. We'll add some new sound effects using Audacity too. I hope to...
11
2 k
Jeremie |
live hack
DJ's 4Th Hack Event (Arduino, Bioloid, Lewansoul, And More)
In the last event, some people asked me to demonstrate how to use the LewanSoul Serial Servos. Also,...
37
3 k
fxrtst |
live hack
Botmatrix Side Stream 4
This 3D printed monstrosity is a new challenge for me! Voltron has now been updated to ezrobot HDD servos and is ready to do some actions. Will I be able to make a 16inch...
4
726
Jeremie |
live hack
Botmatrix Side Stream 2
I'm going to do my best to finish the ROB hack!
5
745
JustinRatliff |