Robot Head

StorySkip to comments

I started on a little project for a humanoid-type platform. I have ideas for the body and such, but i'm starting with the head because i'm adding new features to EZ-Builder for it.

Richard R
Commented June 2015
@nomad18.08 You don't need a control for it... it's not a robot... it's just 3 servos, 2 leds and a plastic mask... It's not difficult to animate using simple scripts or the auto positioner control.....See here....
Nomad 6R
Commented June 2015
rr

thanks
Trent
Commented August 2015
Looks great! Very realistic looking. Well done!
Andy Roid
Commented August 2015
Here is a photo of my robot and the mask I used.

There is an EZ camera installed which looks thru the hole in the nose. I used 2 standard EZ servos in the neck which allows movement. The eyes are made from white plastic eggs which are glued to the servo arms on 2 micro servos.

@ nomadTMBS

She does facial tracking and eye tracking which I know you have done. Just be sure if you use micro servos get a voltage reducer so you don't burn them out.

Ron
User-inserted image

User-inserted image

PS the mask was about $5.00 at a craft store.
Nomad 6R
Commented August 2015
thanks for the tip
Robot
AvatarDJ Sures
Published on Friday, December 9, 2011