By Mastersailor
— Last update
Other robots from Synthiam community
Jstarne1's Diy Ezb Powered Sla And Lipo Battery Safe Charger...
Hello guys , as some of you know Ive spent the last several days searching for a new place to live and finally found one...
Thecrustychicken's Crustybot 1.2
CrustyBot 1.2 The CrustyBot 1.2 is made from: Jet3 mobility chair base Sabertooth 2X60 Motor Controller EZ-B 3.0 Robot...
Justinratliff's Ez-Robot Bb-8 Hexapod Body
I made a BB-8 hexapod body to go with the head. You can use the mountable head with the EZ-Bit I made: Or you could...
@MasterSailor,
Noisy Boi is looking slick! Will you be sharing some of it's features on youtube?
We are, after shake down, going to make a pitch video. Wish us luck!
Noisy Boy failed his start from a dead stop on a 45 degree angle test today during shakedown. Very depressing but when see other robots shake down, I guess it could be worse.
https://twitter.com/DaveLeeBBC/status/1136074738499899392
https://youtu.be/mrXfh4hENKs
Robot has too much torque, going to try chain tensioners, lighten massive wheels, deepen motor sprockets. Don't know if they make torque converters or not.