Hi!
I want to show some pictures from my new project "Moveo"
https://www.bcn3dtechnologies.com/en/bcn3d-moveo-the-future-of-learning/
https://github.com/BCN3D/BCN3D-Moveo
http://www.thingiverse.com/thing:1693444
First i will try to controll the arm like the original, but later i try to controll via EZB!
By rentaprinta
— Last update
Other robots from Synthiam community
Hoolagen1's Update To My Wall-E
update 9-9-2013 added pics of the sparkfun mp3 trigger and installation. check it out! I have added body tilt, forward...
Wiinteru's Blue Irobot Roomba Hack
Basically, I had this blue Roomba lying around and an EZ-B v4 and 2 extension cables so I had thoughts about hacking it....
Tezsmith's Giving A Meccano G15 Ks An Ez Makeover
Hi there, my name is Tez, I have just completed EZ-Robotifying my G15 KS. Not a technical term but sounds good anyway....
The original specs does not include encoders, or potentiometers so no feedback.
Check my comment (Sep 1, 2016)
https://www.thingiverse.com/thing:1693444/#comments
Every time you power on the arm, you need to perform a manual alignment (position zero), if you are ok with that ...
but still a wonderful design.
Nice build, Boris! Looking forward to seeing it working. It will be interesting to see how you get it work with an EZB. Nice to see you back on the forum, it's been awhile.
Awesome project...thanks for sharing!
HI Bob!
Yes, long time ago....
but i told you: I´ll be back! ;-))))
My poor "Hansi" - Inmoov is still waiting for his arms - poor boy!
But maybe next time.
Hi ptp!
Thanx for this info! I didn´t know it. But i hope i can conjure with the EZB a cool robot arm.
Do somebody know what is the best stepper driver controller which works good with the ezb? For this project i use Nema17 - Nema14 - Nema23 (12-24V - max 4A)
For now i will use the TB6560 with the Ramps 1.4 and the Arduino - like it´s written in the manual.
Maybe it gives a better solutions.
Hi Mickey!
How do you do?
I am doing good...Danke Danke!
Update for the Moveo Arm:
Specialy for labala (who made and make a cool remix work on the moveo)
http://www.thingiverse.com/thing:2146252
First Problem ist between Axis 2 and 3
Best idea to put some rings between.
2 Problems are with the remix Axis 4 from labala:
The places for the bearing must be bigger
Maybe for the next time to close this cable holders - better to put the cables inside!
Here is a remix of the Mantis Gripper by Andreas Hölldorfer
Original: http://www.thingiverse.com/thing:1480408
Remix from me: http://www.thingiverse.com/thing:2306360
You can check my Things here for some Pulleys:
http://www.thingiverse.com/RentaPrinter/designs
Here a question to the electric - Maybe somebody has more knowlegde them me - i asking me if my connection is right?
Its working, but maybe i can make a better on.
The Best way will be to make a connection to a EZB!
ITS POSSIBLE or can i forget this idea?
Looks like a fun project, all the best with it!
cool
If you tell us what stepper motor and datasheet, i can help you. It is possible