Hi!
I want to show some pictures from my new project "Moveo"
https://www.bcn3dtechnologies.com/en/bcn3d-moveo-the-future-of-learning/
https://github.com/BCN3D/BCN3D-Moveo
https://www.thingiverse.com/thing:1693444
First i will try to controll the arm like the original, but later i try to controll via EZB!
By rentaprinta
— Last update
Other robots from Synthiam community
Louis's Quadrupedal Robot Xr4
Budget quadruped with 1.5mm carbon fiber/aluminum frame, 12 MG995 servos and EZ-B controller for omni-directional...
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
Kleinjd's 17 Servo Biped (Formerly Robonova)
16 Hitec HSR-8498NB servos on dual external boards plus a 17th camera servo; 0.38A @6V draw, 1500mAh NiMH per foot and...
Hello DJ!
What a honor that you will have a look!
In the Moment i use
Nema23
https://www.omc-stepperonline.com/high-torque-nema-23-cnc-stepper-motor-35a-3nm425ozin-23hs453504s-p-385.html
Nema17 Nema14
all other steppers are from the same firm
the TB6560
and the RAMPS 1.4
TB65603ASchrittmotorTreiber.pdf
and the RAMPS 1.4
https://reprap.org/wiki/RAMPS_1.4
I hope the Info are ok, if not, i search for better !
Boris
Hello DJ!
And do you think there is something possible with EZB and Nema Steppers/ TB6560 Motor Driver?
Boris
Hello Boris !
I can't find the different motors from the BOM.
Can you give me a screenshot of your omc-stepperonline.com command with the correct stepper motors ?
Thanks a lot !
Antoine
Hello,
thanx for you interest.
You can have a look to my project webpage:
www.kyaz.de
there you can find my actual stepper constellation.
If you need more info, ask me.
Best Boris