Robot Building Questions
Synthiam Credit
Log In
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Exosphere
What is Exosphere?
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Synthiam Swag
See All Swag
Robot Sticker
Recent Robot Skills
View All
Feetech Serial Bus S…
Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports,...
Feetech RS485 Servo
Control Feetech serial bus smart servos via EZB UART or PC COM port in ARC using virtual ports...
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Featured
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle avoidance, and navigation.
Featured
InMoov robot build: lower and mid torso progress, NeoPixel ring installation, weighing Arduino UNO vs Nano for tight electronics space.
question
For D.J. About Speech Recognition
Hey! The Speech Recognition part of the EZB works better than ANY I have ever seen. Even better than Dragon Dictate, in my opinion. But, I want to ask you if there is a limit to the NUMBER of phrases you can put in the Speech Rec program. I notice that when I first start off, it works fine. But, after a while I loose those capabilities. It is just...
2
2 k
MovieMaker |
question
Strange Happenings
I have many many scripts in the Script Manager. When I call on them from another script , it sometimes tells me that there is no window named by that script. But, it is IN the script manager and created. I create another window by the same name and it runs the script in the script manager. But, if I change the second script that I created, it still...
3
3 k
DJ Sures |
question
Relative Tracking Within A Script Woes
Hello Gang, I tried to use relative tracking, within a script. It does not drive the motors that are in the modified servo movement panel The...
2
3 k
DJ Sures |
question
Obstical Course
www.dump.com/robotmaneuver/ This thing needs an EZ-B
0
3 k
Bookmaker |
question
Ez Kit Questions
I don't think it's appropriate to post this here but when I tried under "Contact Us" I have gotten no response in 4 days. I tried to contact you again through Contact Us under Technical but got this " Warning: Technical Support? As stated above, sadly the EZ-Robot staff will not be able to assist with technical questions over email...
23
5 k
WMoecke |
question
Removing The Ic
Folks, I need to replace the IC on my EZB. I received a replacement chip, and I assumed I would need to you an IC "puller". However, I don't own one, and before I make the run to a...
3
2 k
jstarne1 |
question
Project Program Code
I am working on a ar drone parrot using camera device, ar drone control panel in which window can I see the codes of tracking color camera
2
2 k
DJ Sures |
question
H-Bridge Dual Dc Motor Controller
Hi, I got my H-Bridge from Ez. I'm playing with tutorial 43 working with the HBridge. I can not get my robot to move. The H-Bridge work fine using Ez...
7
3 k
rgadagno |
question
Serial Gps, Wired
Hi I'd like to connect a wired serial GPS to my EZ board (got the GPS Module PMB-648: https://learn.parallax.com/kickstart/28500). Is far as I understand it isn't yet possible to read a series of data/text/chars via the digital port and setting the read baud rate. Am I right? Anders P.
2
2 k
Anders.Plovgaa… |
question
Let's Talk About Navigation
Have any of you gotten your robots to Navigate flawlessly without running into the tables,chairs,etc. ? If so, what tips do you have to offer? There MUST be a good Navigation Algorithm out there. On small robots, this seems to be easier. But, on large ones it can be disastrous. I would like for us all to talk about our experiences with this problem...
4
3 k
MovieMaker |
question
Motor And Potentiometer Script Help
I had this script working in ARC with only one board. I added a second board and added a 1. to the beginning of each command in the scripts but now I cant get the ports to turn of or on. I also get Syntax errors after I've run the scrip a few times and (I dont think) I made any changes. I also added the .1 in the call scripts "move right"...
2
3 k
Dave Schulpius |
question
Firmware Update Question With Vm And Windows 7 64 Bits
Hello, I have just received my ez robot :-) I have install the last sofwtare and When I connect to the EZ-Controller an Upgradde need to be done. Just to present my config : MacBook Pro running VMWare Fusion with Windows 7 64 bits I have launch the Firmware Update and it start and after the green bar from the update finish (to the end) nothing...
1
2 k
Mika77f |