Robot Building Questions
Synthiam Credit
Log In
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Exosphere
What is Exosphere?
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Synthiam Swag
See All Swag
I Make Robots Crew Socks
Recent Robot Skills
View All
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Hugging Face
Connects your robot camera to Hugging Face AI models for vision chat, object tracking,...
Autonomous AI
Autonomous AI robot agent with vision, speech, movement, animations, memory, and self-directed task...
Featured
Control brushless motor controllers (hoverboard-style) via EZ-B: configure direction, speed and optional brake ports for DIY robot movement.
Featured
Expand ez-robot HSWB04F controller ports for Jo Zero humanoid, hack or add servo inserts to support 22 servos
question
Jerky Servos
I have constructed my version of jd robot using EzB-v4 ,7.4v Lipo and hi torque 7.4v servos. Works well but the servos are jerky. They work fine individually. Any ideas? confused
9
3 k
westies |
question
Iotiny Used In A Real Project (Inmoov)
Just a quick picture (so not much to see) of my new inMoov utilizing the ioTiny in his arm(s).... More later... @DJ hopefully you'll keep the...
10
4 k
cem |
question
Continuous Servo Movement Panel
I plugged in 2 continuos rotation servos to my ezb one in D0 the other in D11 and selected continuos rotation movement panel while configuring i clicked on...
31
7 k
Mohamed.r |
question
Communication
I need help. I'm trying to solve this comm issue for my son and keep striking out. I copied and pasted as much info as I've collected, but basically it connects and then disconnects if I try to do anything. It seems as the ezb4 forces the connection to close, but the computer connection still shows the connection active. EZB 0: EZB 1: EZB 2: EZB 3:...
27
6 k
DJ Sures |
question
Size Of The New 8X8 Rgb Animator
@EZRobot is there any way you can confirm the size (length and width) of the soon to be released 8 x 8 RGB? I am altering one of inMoov's parts to use with it so I just need to know the size of it... Thanks kindly Richard
2
3 k
Dunning-Kruger |
question
Fine Tuning V-Ports
Hi, I'm really enjoying using an EZB-v4 to control my Humanoid. I had to switch to a SSC-32 to run the servos (due to amperage limitations of using 20 high torque servos) and...
10
4 k
DJ Sures |
question
Right Shoulder Servo Not Working
Hi, We have used the EZ-JD robot the last couple of months with joy in our school. But suddenly the left shoulder servo will not function any more. We have tried to calibrate the robot, and tried to swap right and left shoulder port without any luck. Any tips, or is this a direct warranty claim?
2
2 k
cdonc |
question
Communication Between Ezb4/2 And Parallax Dhb-10 Motor Board
I am building my robot by starting with an Arlo base. I am using the new DHB-10 drive board that takes the place of the HB25 drives. The board accepts serial commands on what is label CH1. The board has it's own processor and is pre loaded firmware commands that can be issued by its serial port. I want to issue these commands from my EZB4/2. I am...
6
3 k
Dave Weindel |
question
Serial Communication To Vintage Rs-232 Device
Hello All, I am attempting to communicate to my Heathkit Hero Jr. using the Terminal EZB control. I have no trouble communicating with it via TerraTerm/Hyper Terminal. I have connected the TX on the robot to the RX line on UART #0 and the RX on the robot to the TX line on UART #0 and the ground to the ground on UART #0. The robot is using 5V logic,...
6
3 k
GBot |
question
Mqtt And/Or Amqp
Any chance that the EZ-Robot software will support MQTT or AMQP? It would be great if it acted as the broker or as a client.
3
3 k
DJ Sures |
question
Controlcommand Error: Unknown Command For This Window: Scriptstart
I can't start Http Server using the code below: ControlCommand("HTTP Server", ScriptStart) Quote: Unknown command for this window: ScriptStart
3
3 k
DJ Sures |
question
F-30 Vs F-31 Six Package
Greetings. I am new to the community and have just received my first EZ-Robot product, a Six hexapod. What is the difference between an F-30 Six and an F-31 Six? The product on Amazon that I ordered (from a third party) was an F-31 - the number was shown in the photo - but I have received an F-30. Wondering if I should make a stink. The price was...
2
2 k
turo |