Robot Building Questions

Cfsound Iii Questions__@Dschulpius And Dj

@dschulpius....I see you are using a CFSound III in you B9 Robot. I plan on using a ASUS Mini ITX on my bot. Have you tried to see if EZ-B can be used to trigger sound files stored on the memory card using the CFSound III's RS-232 port? Much like others are using the MP3 boards. If so, can you talk me through how to set it up? @DJ...have you ever...

Servo Wiring

Just received my servo and the colors appear orange, red, and brown. Needed to know which color is pos, neg ,and data. Thanks.

Two Ez-Robot S08nf Servos Are Bad

I found out that two EZ-Robot S08NF servos are bad. How can I have them replaced?

Bootloader Question

Hey DJ, I've noticed in the source of EZ OpenBot you have the message type BootLoader, what is it for? Another question, I see the EZ Bot board is an ATMega128 if I'm not wrong, then it is possible to program it to run without a computer (Embedded programming). I've found ET-AVR ISP in here https://www.futurlec.com/ET-AVR_Stamp.shtml#Programmer...

Upgrading Firmware

Hi All - I'm hoping someone can help me out. I'm trying to update the firmware on my new e-z robot. I watched and read through the "getting started" tutorials, and I've searched existing forum posts but can't seem to solve my problem. Details are: 1) I originally tried to connect to my home pc (xp sp3) with a Bluetooth usb adapter that I...

Orugas Donde Puede Conseguirlo

donde podria conseguir orugas para tanque pesado y motores dc ? un saludo desde asturias

Sata To Sd Drive Converter Questions.

I have just ordered a Sata to SD drive converter for my mini itx board and had a couple of questions for those out there that have gone this route. The converter can handle up to a 32gb card (which I also ordered), I feel this is plenty for the OS, EZ Robot software and my sound files, any input here? I should be able to run Windows 7 on these...

Emotions With Auto Position

I was poking around in the examples folder and opening them one by one to become morez edjamakayted. I found something that startled me a little. Take a look under the auto position config tab, lol I instinctively looked at my webcam to see if the light was on! lol

Step-Down Voltage Regulator Gets You 3.3V Dc

Hey folks. Just ordered a few of these: AMS1117-3.3 Step-Down Voltage Regulator Adapter with 3.3V DC output. And they are easy to install and use; and also have Low power consumption. Power In: 4.5--7V DC Power Out: 3.3V DC with Max 800 mA Current. They are good for those applications where you need to get 3.3 volts to "something". In my...