Robot Building Questions

Sound Clip Tictactoe

is it possible to get the sound in tictactoe the woohoo.

Uart Baud Rate Speed

I'm not really up to speed on Uart ports and how fast to expect them to pass info back and fourth. I'm sending and receiving to a Kangaroo X2 at 9600 baud and when I ask for postion feedback the response seems a little slow. Can I raise the baud rate and speed this up? Can I even do this?

Mpu9150 And Ezsdk In C#

I am trying to use the 4 in 1 sensor from the ezb and get the information in C# through the use of the SDK. I had hopes that there would be a sample project for this sensor but I couldn't find one. I know you have to first initialize the sensor. Does anyone know the command to initialize the sensor? I assume once it initialized, I will be able to...

Pixy Vision Sensor

Hi, I have found this on Kickstarter : Pixy "Pixy is a fast vision sensor you can quickly "teach" to find objects, and it reports its findings through several simple interfaces." It seems that it could be a interresting addition to EZB for object recognition. What do you think? An interresting aspect of the project is the...

New Sensor P.I.X.Y Camera

i found this really fast camera. new camera

Wiimote Question

Hi, I ordered a WiiMote Motion Plus and found out after the fact that it is incompatible with ARC. This is stated in the tutorial. Is there a work-around? From what I see on Amazon all of the WiiMotes are Motion Plus except for a couple of used ones. Tom

Ezb4 Controller

Which power supply portable or ac adapter that I can use for the ezb4 controller? MC....

Camera Image Freezes

Camera Disabled Camera Initialized: EZB://192.168.1.1 @ 160x120 EZ-B v4 Camera Error: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond....

Accessing Engenius Eap350 With More Then One Ezb

On the advice of fellow members of this forum I bought an EnGenius EAP350 a while back. The thinking was to give my EZB an access point with a stronger signal to access then my network's wireless router. It worked like a charm. Here's my question; I now have 3 EZB's in my robot and have noticed that only one is using the EnGenius EAP350 as an...

Digital Pins Not Working

All the digital pins on one of my 3 EZB V4's stopped working. I rebooted and reset the unit and still can't get the 3 volts at any of the digital pins when I try to turn them on through ARC. I probably burned something up on the EZB but was wondering what type of mishap would cause them all to stop responding? I'm a little leary to just swap out...