Robot Building Questions

Obstical Course

www.dump.com/robotmaneuver/ This thing needs an EZ-B

Ez Kit Questions

I don't think it's appropriate to post this here but when I tried under "Contact Us" I have gotten no response in 4 days. I tried to contact you again through Contact Us under Technical but got this " Warning: Technical Support? As stated above, sadly the EZ-Robot staff will not be able to assist with technical questions over email...

Serial Gps, Wired

Hi I'd like to connect a wired serial GPS to my EZ board (got the GPS Module PMB-648: https://learn.parallax.com/kickstart/28500). Is far as I understand it isn't yet possible to read a series of data/text/chars via the digital port and setting the read baud rate. Am I right? Anders P.

Let's Talk About Navigation

Have any of you gotten your robots to Navigate flawlessly without running into the tables,chairs,etc. ? If so, what tips do you have to offer? There MUST be a good Navigation Algorithm out there. On small robots, this seems to be easier. But, on large ones it can be disastrous. I would like for us all to talk about our experiences with this problem...

Motor And Potentiometer Script Help

I had this script working in ARC with only one board. I added a second board and added a 1. to the beginning of each command in the scripts but now I cant get the ports to turn of or on. I also get Syntax errors after I've run the scrip a few times and (I dont think) I made any changes. I also added the .1 in the call scripts "move right"...

Firmware Update Question With Vm And Windows 7 64 Bits

Hello, I have just received my ez robot :-) I have install the last sofwtare and When I connect to the EZ-Controller an Upgradde need to be done. Just to present my config : MacBook Pro running VMWare Fusion with Windows 7 64 bits I have launch the Firmware Update and it start and after the green bar from the update finish (to the end) nothing...

Finally Really Starting On My Bot.

I saved all my discretionary income and was torn between buying a Nexus 7 when the 32gb version comes out or buying robot parts to get started on my real robot build (Boxbot has been fun, but not my ultimate goal). I decided to pull the trigger today and ordered a Sabertooth 2x25, some switching DC-DC converters to take the 24 volts from my...