Robot Building Questions

Using Bluesmirf Gold Modem In Ez-B

I was playing with Arduino Uno and tried to use my BlueSMiRF Gold Class1 Bluetooth modem. I finally found that the modem wants to communicate with the PC/Terminal at its default 115200 baud rate. But it can communicate with Uno at other rates, say 9600 baud. And this required sending a command to the modem, which I learned how to do. The modem...

Love The Cams

Love the cams thats vary cool what is the little elcove to the right of your workbench DJ

Html Error

I doubt it will make any difference, but when I looked at the 'EZ-Office' page source to find out what script you use for refreshing I found a little typo in the code. At line 17, it says <script language="javakscript" type="text/javascript"> The type is correct, but the language should be without the 'k'. I think...

Stop Pwm

Hello. I have installed 2.5 Amp Motor controller and now i am writing the code for controlling it. No problem for setting speed, but i am not able to stop pwm. This is the code i have used for setting speed and it works fine: Private Sub button2_click EzB_Connect1.EZB.PWM.SetPWM(Digital.DigitalPortEnum.D15, 50) End Sub This is the code i have used...

Math In Ez-Script

How do you do basic math functions within EZ-Script?

Wild Thumper Alternate Wheels

Hi, I like my Wild Thumper 4WD, but the wheels are really meant for rugged, outdoor use. I would like to replace them with similarly sized wheels that are smooth (unlike the kit wheels which have big spikes for traction on dirt). Have any of you done this before? Can you recommend a website to shop for replacement wheels? Thanks, Mike

Alternative To Bench Power Supply?

Hi folks, I was just getting ready to order the EZ-Robot Bench Power Supply. But the cheapest shipping to me in the USA is $25.50! Is there a cheaper alternative on Amazon or elsewhere?

Automatically Connect To A Port

Hello. I would like my Visual Basic program to automatically connect to Ezboard when i launch the program. Ezboard connection is on COM port 3 on my pc, so i have written the code: Sub Form1 load Ezb_Connect1.Connect(3.0) ...but it does not work So i have tried Ezb_Connect1.Connect(3) ...but it does not work Can you help to solve the question,...

Question On Bipeds?

I see that alot of biped (Lower halves at least) use a 6 servo set up. Those are all un-modified servos correct? There really isn't a need for modified servos in that set up is there? Thanks for any input in advance.

Wall-E

I just received my Wall-E on E-bay Did DJ use the MP3 Trigger for his Wall-E? Do I need a inline amp to the speaker?