Robot Building Questions

Servo Wont Move Until Second Servo Moves First

Hi all, I have several EZB's in my robot with servos attached to the EZB on connection 2 in ARC. I've got a weird issue I can't figure out with a servo attached to that EZB's D0 port. My problem servo is attached to port D0 with 5 other servos attached to other digital ports, D2 through D6 with D2 not being used. They all work fine except the one...

Raspberry Pi GPIO With Windows 10

Hello everyone;  I'm curious regarding the use of on-board GPIO pins with regards to embedded PC's, such as the Raspberry Pi 3B I am using in my project that have ARC running on them. I am running ARC Teams on this Raspberry Pi to control other EZB's in the robot, and in order to shut the robot off properly, the Pi will need to send a shutdown...

Inmoov Multiple Servo. My Power Supply Will Not Power My Servos

I am going to try to configure this robot using the EZ-B V4. I'm currently trying to power 6 servos for the right hand. The servos are MG996R, they require 6V. I purchase a power supply ( DROK 48V Power Supply, AC 110V/220V to DC 0-48V 10A 480W Buck Converter, Adjustable Variable LED Adapter Regulated 5V 12V 24V 30V 36V 48V Volt Voltage Transformer...

My Robot Is Too Loud.

Hey! I was testing my speech recognition and my robot won't respond to 'robot stop'. I know there's nothing wrong with the command because it recognized my speech when it was stationary but when it's rolling it seems to not pick up my voice over it's own motors. So how do I make them more quiet? Edit: I forgot to mention that I'm using a head set...

How Can You Fix The Camera Quality On Raspberry Pi 3B

How can you fix the camera Performance  on raspberry pi 3B. I’m making a robot that tracks a red ball but because of the raspberry pi 3B’s GPU lagging it can’t process the ball. I did check the raspberry pi windows performance tips but with no changes in camera performance?

Iternet Connection

I have 2 JD Humanoids, both connect to the internet and initialise then go dead, still connected, blue light constant, but with no functions, The camera says its ready but when switched on immediately stops. If I disconnect and turn the robot off the site stay available and stops normal connections to the internet, I have to reboot the PC to get...

The Program Shuts Down When I Move The Simulator Pictures?

Why does the program shut down when I release the mouse button after moving one of JD's parts (servo)?

Problem Controlling Servos While On A Iphone Hotspot

Hello, I have a Darwin Mini that I hacked to also carry a Raspberry Pi Zero. The OpenCM connects to the Pi via Micro USB and I run ARC on my Windows laptop to connect to the Pi. I installed the OpenCM USB port settings on the Pi and so far I can successfully control the servos that are connected to OpenCM from ARC. When I run ls /dev/ttyA* on the...