PRO
RoboHappy
USA
Asked
My First 3D-Printed Robot
Here's my first 3D-printed robot!
I used the EZ-Robot InMoov Head Kit and tested it with the sample projects available in Synthiam ARC. I'm still exploring possibilities, but I'm excited about the potential applications.
Some components need fine-tuning, especially the jaw and mouth setup. The eyes also require adjustments since the camera is positioned in the left eye.
Here's a quick video showcasing my project: Watch on YouTube
Stay tuned for more updates!
Your video is unavailable.
Congrats on making your new friend! I know how exciting it is when a creation you build comes to life. What fun!! Looking forward to seeing what it can do.
Thanks Dave,
Hope this link works
Its from the one of the sample programs.
https://youtube.com/shorts/-XCUOIl5iKk
That'll work. Thank you. Looks like you got a nice start to a cool project. Have fun.
Nice green eyes, camera installed into left eyes.
I need to readjust the eyes. you can see see the upper eye lid via the ARC's camera view.
This could have been designed better.This was a cool build. Don't like how the mouth closes though. Will look to how Nomad did his setup. May build a second head too lol
hi robohappy
nice work . im going to tinker some more with the jaw hings . i build allreddy 5 heads . just to learn .xD
hi robohappy
make sure you cut off that piece of the horn .