UBTECH Alpha Servos UBT-12HC icon UBTECH Alpha Servos UBT-12HC — Control UBTECH Alpha UBT-12HC smart servos via ARC using EZ-B v4/IoTiny UART, assign virtual ports, set baud, custom bits and position mapping. Try it →
Asked — Edited
1 Participant

Using 2.4Ghz Camera's Communication Module On The Ez-B

Hey, I've noticed the bluetooth communication in the EZ-B has a certain low range, it stops working at about 5 meters, but the camera has a very large range. I'm wondering, is it possible to use the camera's communication module to communicate with the EZ-B? I understand I'd have to do some programming to get the data off the USB, but in the hardware aspect, is it possible?


ARC Pro

Upgrade to ARC Pro

Subscribe to ARC Pro, and your robot will become a canvas for your imagination, limited only by your creativity.

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#1  

No. They are not the same protocol

The ez-b distance depends on your computers antenna. If you desire further range, consider replacing the Bluetooth with xbee or synapse:)