Live Stream Broadcast icon Live Stream Broadcast — Broadcast live audio and video from ARC camera to the web via HLS; cross-browser streaming. Requires router configuration for external access. Try it →

ARC Pro

Upgrade to ARC Pro

ARC Pro is your passport to a world of endless possibilities in robot programming, waiting for you to explore.

#1  

It doesn't look like you completed any of the training from the Learn Section. I would make sure you completed all the training, make sure your servos are calibrated per the tutorials.

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#2  

its 100% one of these regarding walking...

  1. your leg servos are not connected correctly. You can verify by reviewing the assembly guide

  2. your leg servos are reversed. You can verify by reviewing the assembly guide

  3. you have not created a servo profile. You can verify by reading the servo profile step in jd's usage guide under the LEARN section.

As for freezing, it's one of these

  1. ezb comes lose when jd falls over or a wire is too short and pulls the ezb out, which disconnects power

  2. rgb led eyes are not plugged in securely to ezb

  3. servos are connected incorrectly and shorting out, causing the ezb to reboot. This could result in a fire (check terms of use). Verify wiring is correct and the servos are not making contact with each other and/or moving past their limits.