Interface Builder icon

Interface Builder — Create touchscreen robot control panels with buttons, joysticks, sliders, camera views and scripts; multi-page fullscreen UIs for PC and mobile. Try it →

Roborad

Skip to comments Jump to end

I posted this in the wrong section I guess, but here is a link to my newest bot - RoboRAD. I am combining a RAD 2.0 base and a robosapien.

By bret.tallent Oct 2012 — Last update Nov 2013

bret.tallent

USA

Jump to end

Discover more robots

Lizpoir's Video From My Omnibot 2000 An From My 3D-Printing Mini Robot

Lizpoir's Video From My Omnibot 2000 An From My 3D-Printing...

Watch two videos showcasing my robots in action, have fun.

Tmesserschmidt's Topsie The Easy To Build Robot Dog

Tmesserschmidt's Topsie The Easy To Build Robot Dog

Build Topsie, a low-cost DIY quadruped-no 3D printing or soldering; assemble in a week and program walking gaits with...

Buratino's Basilio

Buratino's Basilio

Basilio 45cm 3D-printed walking robot with 26 DOF, external potentiometers for pose capture, seeking EZB/EZ Robot...

ARC Pro

Upgrade to ARC Pro

Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.

Compare Pro Features View Subscription Plans

USA

#169 Jan 2013

I plan on just providing 6 volts to the pcb on Robosapien initially and see how well he works. Since I am not using the legs/motors at all, all of that wiring has been removed. I made a little progress last night. I used my bone cement to fill in around the base of robosapien where he attaches to the RAD (with his abdomen pieces on) and did some dremel work to smooth things out. Tonight I can apply a finish coat of bone cement to give hime a nice surface for painting. Then I will just do some touch up paint to make him blend into the RAD. I also drilled a hole where I can fish my wiring from the base up to the EZ-B that will be on his back.

I also have a volt meter coming in, so then it is onto making the riser.

USA

#170 Jan 2013

6 volts will be ok for PCB, i will think you need about 9 volts for the motors still, I took off my legs on one off and wiring

USA

#171 Jan 2013

My Robosapien only has the 4 D cell batteries providing 6 volts total.

USA

#172 Jan 2013

I guess only robosapien V2 has 6 D cells total 9 volts

USA

#173 Jan 2013

Hmmmmm - it be a power hog.

USA

#174 Jan 2013

its a much bigger robot,i found a great hack site on it with pins location and lot more info but not much on ROBOSAPIEN ,only ROBOSAPIEN V2

USA

#175 Jan 2013

I guess ROBORAD wont be able to dance like robosapien HUH

USA

#176 Jan 2013

No, but he can do the upper body stuff.

19
20
21
22
23
24
25

Login to post a comment